Product Manual

5-13

Periodic maintenance

5. Remove the carbon deposits on the muffler cap,

muffler screen and spark arrester using a wire

brush.

6. Check the muffler screen and spark arrester.

Replace them if damaged.

7. Install the spark arrester.

TIP

Align the spark arrester projection to the hole in the

muffler pipe.

8. Install the muffler screen, muffler cap and muffler

cap band, and then tighten the muffler cap bolt.

9. Install the muffler cover and tighten the muffler

cover bolts.

711-075

When cleaning, use the wire brush lightly to avoid

damaging or scratching of the muffler cap, muffler

screen and spark arrester.

NOTICE

1. Spark arrester projection

2. Hole

Muffler cap bolt tightening torque:

3.5 N·m (0.35 kgf·m, 2.6 lb·ft)

Muffler cover bolt tightening torque:

7 N·m (0.7 kgf·m, 5.2 lb·ft)

7PC-F8199-U1-E0.book 13 ページ２０１９年９月６日　金曜日　午後２時３８分