manual

Getting Started
English
2
Chapter
11
Press [ON/OFF] on the control unit.

See Chapter 2 “Getting Started –
Turning Off the Disklavier (Standby
Mode)” on page 14.
While the control unit is in the standby mode, you can also turn on
the Disklavier by pressing [ON/STANDBY] on the remote control.
The following message appears on the display, and [ON/OFF] on
the control unit lights green.
After several seconds, the loading screen will appear, and last
selected song will be loaded.
Your Disklavier is now ready for use.

Setting the correct time is also
important for engaging timer-
controlled programs. See Chapter 4
“Advanced Song Playback – Using
the Timer Play” on page 35.
The Disklavier has an internal calendar that can be set from 1/1/1985
00:00:00 to 12/31/2084 23:59:59. Set the calendar accurately so that the
Disklavier displays the correct current time during the stop mode.
Time is displayed in 24-hour format.
■ Time Zone
Press [SYSTEM] on the remote control.
The system menu screen appears.
2
PLEASE WAIT
Setting the Internal Calendar
[SYSTEM] “TimeZone” and “Clock Adj.”
1