Owner`s manual

Recording Your Drum Performance to a Song

Quick Guide

DTX900 Owner’s Manual

Recording Additional Notes to an Already-recorded Track (Overdub)

Use the Overdub recording method when you want to add more data to a track that already contains data. The Overdub

Recording procedure is almost the same as Replace except that the Record type is set to “overdub” and you need to press the

[>/■] (Play/Stop) button when you want to stop recording.

When the song reaches the end of the last measure, it will automatically start again from the beginning and new data will be

added to the track’s previous data.

Recording Along With the Preset Song

Although your drum performance cannot be recorded to a Preset Song, you can add your own drum performance data to a

Preset Song by copying the Preset Song data to a User Song.

Select an empty User Song (containing no data) in the Song

mode.

Note that the “TR1” and “TR2” indications are not shown in the display when an

empty User Song is selected.

Press the [F2] JOB button followed by the [SF1] SONG button to

call up the SONG JOB SELECT display.

Move the cursor to “01: Copy Song” then press the [ENTER/

STORE] button to call up the Copy Song Job display.

This Job lets you copy the source Song (speciﬁed in this Job display) to the current

Song.

1 Song bank and number

Indicates the bank number and name of the source Song.

Type = overdub