User Manual

Setup
DTX502 Owner’s Manual
Setting Up for Sound
13
1. If you have connected your drum module to other audio
devices such as powered speakers, ensure that the volume on
those devices is turned down fully.
2. Press the [ ] (Standby/On) button.
When you turn on your DTX502 for the first time, the Initial
Setup page will be displayed. On this page, you will be required
to specify the following.
1. Identify your drum kit using the Data Dial and press the
[SAVE/ENTER] button.
2. Using the Data Dial, select how long the DTX502 should
wait before turning off automatically, and then press the
[SAVE/ENTER] button.
To quickly disable the Auto Power-Off function, turn on the drum
module while holding down the [ ] button.
Turning On the Drum Module
Initial Setup
 Your drum kit’s model number
When you specify the model number, the DTX502 will auto-
matically optimize the trigger output levels for all of your
pads.
 Auto Power-Off time
The Auto Power-Off function automatically turns off the
DTX502 after a certain period of inactivity. This helps to con-
serve energy should you forget to turn it off yourself.
Settings
DTX522K, DTX532K, DTX542K, DTX562K,
DTX500K, DTX520K, DTX530K, DTX540K,
DTX550K, DTX560K, DTXP4STD (DTX-
PRESS IV STD SET), DTXP4SP (DTX-
PRESS IV SP SET), DTXPL (DTXPLORER),
DrumTrig, and UserTrig
NOTE
•Your drum kit’s model number is indicated on the box it came
in.
•You can change the specified drum kit at any time after com-
pleting Initial Setup. For details, see the description of the Trig-
ger Setup page from Menu Mode (page 66).
Selec
t
your ki
t
DtX562K
Settings
off (i.e., Auto Power-Off function disabled),
5min, 10min, 15min, 30min, 60min, and
120min
• Any unsaved changes to parameters will be lost when
the drum module is turned off by the Auto Power-Off
function. Remember to store modified settings regu-
larly.
• In certain modes of operation, the Auto Power-Off func-
tion will not turn off the drum module when the set time
has elapsed. We recommend, therefore, that you
always turn off the drum module manually when you
are finished using it.
• If you expect your DTX502 to be inactive for a certain
length of time while connected to other audio equip-
ment, we recommend that you turn the volume on the
other equipment fully down. Alternatively, you can dis-
able the Auto Power-Off function to ensure that the
drum module stays on.
NOTE
• Settings for the Auto Power-Off function do not represent exact
times and there may be some variation.
• By default, the Auto Power-Off time is set to 30 minutes.
•You can change the Auto Power-Off setting at any time after
completing Initial Setup. For details, see the description of the
Auto Power-Off page from Menu Mode (page 75).
Quickly Disabling Auto Power-Off
Au
t
o Power Off
timer= 30min
NOTICE
Au
t
o power off
disabled.
Hold