Owner`s manual

58
Feature Reference Drum Kit Voice Edit Mode
11 Key Off
When a voice with a long release is in use,
sometimes a MIDI note off signal may cut the
sound in an unnatural way. To prevent that, set
this mode so that the DTX does not receive
MIDI note off signals. Set the MIDI note off
settings for each voice assigned to each MIDI
note number.
! Move the cursor to the MIDI note number
focus area and rotate the Data Scroll Wheel
or use the +1/YES and -1/NO buttons to
choose the MIDI note number.
You can also enable the Learn mode (P.115)
to automatically select the MIDI note
number by hitting each pad or drum.
" Move the cursor to the Key Off focus area
and rotate the Data Scroll Wheel or use the
+1/YES and -1/NO buttons.
MISC.
SNARE
KICK
CYMBAL
Key Off
=disable
Key off
MIDI note number
Settings:
The following parameters can be set for MIDI note
number 13 to 84.
disable (will not receive MIDI note), enable (will
receive MIDI note)
A
Some sounds may have an extremely long release when
the Key Off functionis disabled. In such case, press the VOICE
button while holding SHIFT to temporarily stop the sound.
12 Out Port
This sets the output of each voice assigned to
each MIDI note number either to the main
output or auxiliary output. This is convenient
when you want to output specific voice(s) to an
external mixing device.
! Move the cursor to the MIDI note number
focus area and rotate the Data Scroll Wheel
or use the +1/YES and -1/NO buttons to
choose the MIDI note number.
You can also enable the Learn mode (P.115)
to automatically select the MIDI note
number by hitting each pad or drum.
" Move the cursor to the Out Port focus area
and rotate the Data Scroll Wheel or use the
+1/YES and -1/NO buttons to set the focus
area.
Normally select main and the voices are
delivered through the OUTPUT jack on the
rear panel. Choose aux (auxiliary) to output
a specific voice such as SNARE or KICK
separately, and the voices will be delivered
through the AUX OUT jacks on the rear
panel.
MISC.
SNARE
KICK
CYMBAL
Out Port
= main
Out port
MIDI note number
Settings:
The following parameters can be set for MIDI note
number 13 to 84.
main, aux
13 REV Rtn (reverb return)
This sets the Reverb Return Level. By setting the
level, you can adjust the reverb effect of the
entire DTX system. The level can be set for each
drum kit.
Set the level by rotating the Data Scroll Wheel
or using the +1/YES and -1/NO buttons.
MISC.
SNARE
KICK
CYMBAL
REV Rtn
LVL= 127
Settings:
0 to 127