Owner`s manual

32
Feature Reference — Drum Kit Trigger Edit Mode
Y
A
M
A
H
A
D
R
U
M
T
R
I
G
G
E
R
M
O
D
U
L
E
D
T
X
Drum Kit Trigger Edit Mode
This mode contains various settings to adjust the sensitivity or velocity of the inputs from pads and
triggers or assigning drum and percussion sounds to each pad (input).
You can create a new drum kit from scratch or by modifying preset drum kits or existing user drum kits.
These new drum kits can be stored in the user drum kit area (No. 1 to 32).
A No. 1 to 29 include drum kits entered in advance. To edit the drum kit for these numbers, it is recommended to copy a user kit between No. 30
to 32 and use it at a later stage. If you have written over No. 1 to 29 , turn the power on while holding down the DRUM KIT, PAGE up and PAGE down
keys at the same time to reset it to its original factory settings. When you do so, all the data will be erased. Save the data you have edited to an
external device such as the Yamaha MIDI Data Filer MDF2 before you reset.
A You cannot edit a preset drum kit. The changes made to the preset drum kit are temporary. If you want to keep the edited data, select a user
drum kit and save the changes to the user drum kit.
A Use the blank chart provided at the end of this manual (P.166) to memo the editing contents of the user drum kit.
Editing Procedures
! Choose the drum kit you want to edit in Drum Kit Play mode.
" Enter Drum Kit Trigger Edit mode.
# Name the drum kit if necessary.
$ Turn the page and set the necessary parameters.
A It is necessary to choose the input jack number (between 1 and 12) before setting the parameter on the 2nd to 18th and 26th pages in this
mode.
% Enter Store mode to store the drum kit to any one of the user drum kit numbers 1 through 32.
Entering the Drum Kit Trigger Edit Mode
Press the TRIGGER button.
MISC.
SNARE
KICK
CYMBAL
Kit Name
GM std 1
DRUM
KIT
VOICE
TRIGGER
UTILITY
STORE
PATTERN
SONG
CHAIN
A Choose the drum kit you want to edit in Drum Kit Play mode before entering this mode. The LED display will show the drum kit number you
have chosen even after you have entered Drum Kit Trigger Edit mode.
A When the “JumpRcnt (jump to recent page)” parameter on the 7th page in Utility mode is “on”, the DTX will display the page you selected the
last time you edited. Your DTX will display the 1st page when the “JumpRcnt (jump to recent page)” parameter is “off”. See P.116 for details
regarding the “JumpRcnt (jump to recent page)” parameter.