Owner`s manual
123
Feature Reference — Utility Mode
33 ClickOut
This function sets the destination output of the
CLICK. For example, you can set separate
outputs for the click and song, and the
drummer can use the click as a guide click
when playing to a song created by the DTX in a
live performance or studio recording.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to set the output jack.
Select the jack from the following:
mainL+R ....... Output from the OUTPUT L (MONO) jack
and OUTPUT R jack on the rear panel.
aux L+R ........ Output from the AUX OUT L jack and
AUX OUT R jack on the rear panel.
main L .......... Output from the OUTPUT L (MONO) jack
on the rear panel.
main R .......... Output from the OUTPUT R jack on the
rear panel.
aux L ............ Output from the AUX OUT L jack on the
rear panel.
aux R ............ Output from the AUX OUT R jack on the
rear panel.
MISC.
SNARE
KICK
CYMBAL
ClickOut
=mainL+R
Settings:
mainL+R, aux L+R, main L, main R, aux L, aux R
34 PlyClick (play click)
This is an additional feature of DTX version 2.0.
Please refer to the System Upgrade Information
Guide (included in this package).
35 Tempo
This function sets the tempo of a pattern to
either change each time to its default tempo, or
remain unchanged at a set tempo when the
pattern is switched in Pattern Play mode.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to set the tempo. The
following two parameter settings are available.
pattern .......... Changes the tempo of the pattern to its
default tempo when the pattern is
switched.
global ............ Tempo remains unchanged at a set tempo
when the pattern is switched.
MISC.
SNARE
KICK
CYMBAL
Tempo
=pattern
Settings:
pattern, global
36 Count
This function turns the countdown before
playing or recording a pattern or song, on or
off.
Rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to turn the function on or
off. The countdown will be delivered when the
function is on.
MISC.
SNARE
KICK
CYMBAL
Count
= off
Settings:
off, on