User Manual

Appendix
DME Designer Owner’s Manual
494
5 [F5] Key
When the Main display is showing this button calls the Parameter Edit display for the middle User
Defined Button in the lower part of the display.
When the Utility display is showing it has the same function as the Down button.
6 [F6/MUTE] Key
When the Main display is showing this button calls the Parameter Edit display for the User Defined
Button in the lower right corner of the display.
If this button is pressed and held for more that 2 seconds the Mute display will appear.
7 [HOME] Key
Directly recalls the home (main) display. If pressed while the main display is showing the [HOME]
button steps through the User Defined Button display pages (page 498).
8 [SCENE] Key
Calls the scene recall display (page 499). Calls the scene store confirmation display if pressed and
held from longer than 2 seconds (page 499). The indicator will light green while the scene recall/
store display is showing.
9 [CANCEL] Key
Closes the window on the display.
) [ENTER] Key
Confirms and enters a value or setting.
! Display
Displays scene information and device parameters.
@ Dial
Adjusts the value of selected parameters. The ICP1 dial functions in the same way as the DME64N/
24N dial.