User Manual

Chapter 3 Main Panel Window
DME Designer Owner’s Manual
148
SP2060 Library Manager
Click the [SP2060 Library Manager] item in the [Tools] menu to open the “SP2060 Library Manager”
window.
“SP2060 Library Manager” Window
Allows editing of SP2060 Speaker Processor component libraries. Up to 60 libraries can be stored for
each component, and up to 360 libraries can be stored for each SP2060 unit
■ Names and Functions
■ Speaker Processor List
Displays a list of the SP2060 units connected to the specified port.
■ Library List
Library titles and library file names are displayed in this list. The default titles are the file names
minus the file extension. Click a title to edit it. Titles can be up to 23 characters in length, but the
SP2060 display will only show 16 characters. 2-byte characters can also be used, but they will not
appear on the SP2060 display.
■ [Add File] Button
Adds a library file saved by the component editor (.cel extension) to the SP2060 selected in the
SP2060 list. When the [Add File] button is clicked the “Open” window will appear. Select a library
file and click the [Open] button to add the library.
The [Add File] button will be grayed out and inoperable if no SP2060 is selected.
Refer to the “Libraries” section on page 354 for information on component editor libraries.
NOTE
Only users with security status in which [Edit] is checked can edit this feature.