User Manual

Chapter 3 Main Panel Window

DME Designer Owner’s Manual

134

Remote Control Setup List

When you click the [Remote Control Setup List] command on the [Tools] menu, the “Remote Control

Setup List” dialog box is displayed.

Registers the parameters to be controlled from an external controller.

Names and Functions

[DME]

From the list, select the DME where you will be making settings.

[Function]

Select [No Assign], [Parameter Value Edit] or [Level Meter].

[Parameter]

Speciﬁes the parameter to be controlled. A list of parameters will be displayed according to the

selection of [Function].

NOTE

DME Satellite units allow remote control via the [NETWORK] connector as well as via the [REMOTE] connector. The port to

be used is speciﬁed via the “Misc” tab of the “Utility” dialog box (page 162).

NOTE

For details about the communication protocol, refer to the “DME Remote Control Protocol Speciﬁcations” on the Yamaha Pro

Audio website (URL below).

http://www.yamahaproaudio.com/

NOTE

Does not apply to SP2060 units.

NOTE

Components for user modules are also listed in a hierarchal display, but if user module security is enabled, the

components are not displayed. However, parameters displayed in the user module editor are displayed here.