User Manual

2.1.2. Registering devices
Register the devices you want to monitor with ProVisionaire Edge.
1. In ProVisionaire Edge, devices on the selected network interface are automatically detected. Therefore, in
principle, there is no need to manually register devices in ProVisionaire Edge Setting.
NOTE
Automatically-registered devices will not be displayed in the “Manual Device Registration” list on the
ProVisionaire Edge Setting monitoring screen.
NOTE
The following cases will not be automatically detected. Manually register such devices in “Manual Device
Registration” on the ProVisionaire Edge Setting monitoring screen.
◦
When monitoring a device on another network segment
◦
When monitoring the following models, which do not support automatic discovery (as of
ProVisionaire Edge V1.2)
・DM7 Control
・DM3 Standard (when connecting two or more devices)
For the latest supported devices and firmware versions, refer to the compatibility table on the
ProVisionaire Edge download page.
2. When you have manually registered a device, click the [Save] button in the upper right corner of the screen
to save your settings.
2. Basic process
ProVisionaire Edge V1.2 User Guide | 5