User Manual

90 Chapter 7—Input Channels

DM2000 Version 2—Owner’s Manual

Input Channel Mute Master

The DM2000 features a Mute Master function that enables you to mute all channels in the

Mute group using the MASTER button, much like a Mute group on an analog mixing con-

sole. When the Mute Master function is enabled, the channel [ON] button status does not

link to the corresponding Mute group.

1 Follow Steps 1–4 as described in the “Grouping Input Channel Mutes

(ON/OFF)” section on the previous page, select the Input Mute Master check

box, then press the [ENTER] button to check or uncheck the Input Mute Mas-

ter check box.

2 When the Input Mute Master check box is checked, the MASTER MUTE but-

ton for each Mute group turns mute on or off for the channels in the corre-

sponding Mute group.

If the channels are muted by the Mute Master function, the corresponding channel [ON]

button indicators ﬂash. You can assign the MASTER MUTE button function to one of the

USER DEFINED KEYS for convenient operation.

Setting Input Channel Levels

Input Channel levels can be set as follows.

1 Use the LAYER buttons to select the Input Channel Layers.

2 Press the FADER MODE [FADER] button to select Fader mode.

3 Use the faders to set the Input Channel levels.

Refer to the legend on the left side of the faders when setting Input Channel levels.

You can view the fader level values on the channel strip displays while you operate

the faders.

You can also view fader positions on the Fader View pages, which you can access

by pressing the DISPLAY ACCESS [VIEW] button. See “Viewing Channel Fader

Settings” on page 151 for more information.