User Manual

170 Chapter 14—Libraries
DM2000 Version 2—Owner’s Manual
Gate Library
Input Channel Gate settings can be stored in the Gate library, which contains 4 preset mem-
ories and 124 user memories. Preset memories are read-only. User memories enable you to
store custom settings. See page 85 for information on gating Input Channels.
1 Use the DYNAMICS [DISPLAY] button to select the Gate Library page.
2 Use the LAYER buttons to select the Input Channel Layers, and the [SEL] but-
tons to select Input Channels.
When storing, the Gate settings of the currently selected Input Channel, indicated in the
upper-right corner, are stored to the selected memory. When recalling, the Gate settings in
the selected memory are applied to the currently selected Input Channel.
CURRENT TYPE: This indicates the current Gate type of the currently selected channel.
CURRENT CURVE: This is the Gate curve of the currently selected channel.
GR meters: These meters indicate the amount of gain reduction being applied by the
Gate, and the levels of the currently selected channel and its adjacent channel. If Pair mode
for the currently selected channel is set to Vertical, the level of its counterpart on the adja-
cent Layer is displayed.
TYPE/CURVE: The type (Gate or Ducking) and curve of the currently selected memory is
displayed to the right of the memory list.
For details on the Store, Recall, Title Edit, and Clear functions, see “General Library Oper-
ation” on page 165.