User Manual

Pairing Channels 145
DM2000 Version 2—Owner’s Manual
Pairing Channels by Using the Pair Pages
Both horizontal and vertical pairing can be set on the Pair pages.
1 Use the DISPLAY ACCESS [PAIR] button to locate the Pair pages.
The Pair parameters for the 96 Input Channels are divided between two pages. The Input
Channel 1–48 Pair page is shown below. The layout of the other page is the same.
2 To set the pair mode, select the PAIR MODE HORIZONTAL or VERTICAL but-
tons, and press [ENTER].
The Pair mode can be set independently for Input Channels 1–48 and Input Channels
49–96. The Input Channel 1–48 Pair page in Vertical mode is shown below.
Pair parameters for the Bus Outs and Aux Sends appear on the Output Pair page.