User Manual

Attenuating Matrix Send Masters 125

DM2000 Version 2—Owner’s Manual

Attenuating Matrix Send Masters

Matrix Send Master signals can be attenuated pre-EQ. See “Attenuating Signals” on page

130 for more information.

EQ’ing Matrix Send Masters

Each Matrix Send Master features 4-band parametric EQ. See “Using EQ” on page 131 for

more information.

Grouping Master EQs

Matrix Send Master EQs can be grouped with the EQs of other Output Channels. See

“Grouping Output Channel EQs” on page 135 for more information.

Matrix Send Master Inserts

Internal effects processors and external signal processors can be patched into the Matrix

Send Masters by using the Inserts. See “Using Inserts” on page 135 for more information.

Compressing Matrix Send Masters

Signal dynamics can be controlled by using the Matrix Send Master Compressors. See

“Compressing Channels” on page 137 for more information.

Grouping Master Compressors

Matrix Send Master Compressors can be grouped with the Compressors of other Output

Channels. See “Grouping Output Channel Compressors” on page 140 for more informa-

tion.

Muting Matrix Send Masters (ON/OFF)

Matrix Send Masters can be muted as follows.

1 Press the LAYER [MASTER] button to select the Master Layer.

2 Use channel strip [ON] buttons 21–24 to mute the Matrix Sends Masters.

The [ON] button indicators of Matrix Send Masters that are on light up.

Grouping Master Mutes (ON/OFF)

Matrix Send Master Mutes can be grouped with the Mutes of other Output Channels. See

“Grouping Output Channel Mutes (ON/OFF)” on page 149 for more information.

Setting Matrix Send Master Levels

Matrix Send Master levels can be set as follows.

1 Press the LAYER [MASTER] button to select the Master Layer.

2 Press the FADER MODE [FADER] button to select the Fader mode.

3 Use faders 21–24 to set the Matrix Send Master levels.

Refer to the legend on the right side of the faders when setting Matrix Send Master

levels.