User Manual

104 Chapter 8—Stereo Out
DM2000 Version 2—Owner’s Manual
8 Stereo Out
Stereo Out Connectors
The Stereo Out is output by the STEREO OUT +4 dB (BAL) balanced
XLR-3-32-type connectors and the STEREO OUT –10 dBV (UNBAL)
unbalanced phono connectors.
Patching the Stereo Out to Outputs
The left and right channels of the Stereo Out can be patched to the Slot Outputs, Omni
Outs, or the 2TR Digital Outputs. See “Output Patching” on page 79 for more information.
Routing Input Channels to the Stereo Out
Input Channels can be routed and panned to the Stereo Out. See “Routing Input Channels”
on page 93 for more information.
Sending Bus Outs to the Stereo Out
Bus Out signals can be sent to the Stereo Out. See “Sending Bus Outs to the Stereo Out” on
page 109 for more information.
Metering the Stereo Out
Stereo Out signal levels can be metered on the Meter pages. See “Metering” on page 127 for
more information.
Monitoring the Stereo Out
The Stereo Out can be monitored via the LARGE and SMALL CONTROL ROOM MON-
ITOR OUTs and the PHONES (see page 158) or the STUDIO MONITOR OUT (see
page 159).
Attenuating the Stereo Out
Stereo Out signals can be attenuated pre-EQ. See “Attenuating Signals” on page 130 for
more information.
EQ’ing the Stereo Out
The Stereo Out features 4-band parametric EQ. See “Using EQ” on page 131 for more infor-
mation.
Grouping Master EQs
The Stereo Out EQ can be grouped with the EQs of other Output Channels. See “Grouping
Output Channel EQs” on page 135 for more information.
Stereo Out Inserts
Internal effects processors and external signal processors can be patched into the Stereo Out
by using the Inserts. See “Using Inserts” on page 135 for more information.