manual

Using Libraries 169
DM1000—Owner’s Manual
Libraries
15
Output Patch Library
The Output Patch library enables you to store and recall all Output Patch settings. The
library contains one preset memory and 32 user (readable & writable) memories.
To access the Output Patch library, press the DISPLAY ACCESS [OUTPUT PATCH] button
repeatedly until the Out Patch | Library page appears.
For details on storing and recalling memories, see “General Library Operation” on
page 165.
The Output Patch preset memory #0 contains the following settings:
Effects Library
The Effects library enables you to store and recall Effects processor 1–4 programs. The
library contains 52 preset programs and 76 user (readable & writable) programs.
To store and recall settings to and from the library, you must locate the corresponding
Effects processor’s page.
To access the Effects library, press the DISPLAY ACCESS [EFFECT] button repeatedly until
the library page for the desired Effects processor appears.
OMNI OUT connectors 1–8
Aux Outs 1–8
OMNI OUT connectors 9–10
Stereo Out L & R
OMNI OUT connectors 11–12
Control Room Monitor L & R
Channels 1–8 of Slot 1
BUS1–BUS8
Channels 9–16 of Slot 1
BUS1–BUS8
Channels 1–8 of Slot 2
BUS1–BUS8
Channels 9–16 of Slot 2
BUS1–BUS8
2TR OUT DIGITAL1 (L)
Stereo Out L
2TR OUT DIGITAL1 (R)
Stereo Out R
2TR OUT DIGITAL2 (L)
Stereo Out L
2TR OUT DIGITAL2 (R)
Stereo Out R
Note:
• The Effects library is shared by Effects processors 1–4. However, only Effects processor 1
enables storing and recalling Surround effects settings.
•Certain effects type settings recalled to Effects processor 1 disable Effects processors 2–4.