Owner`s manual

Playing Songs and Audio Files
DGX-650 Owner’s Manual
35
Basic Guide
Before using a USB flash memory, be sure to read
“Connecting a USB Flash Memory” on page 71.
1
If you want to play back a Song or Audio
file on a USB flash memory, connect a
USB flash memory to the USB TO
DEVICE terminal.
Audio files must be on a USB flash memory.
2
Press the [SONG/AUDIO] button once or
twice to call up the SONG SELECT dis-
play for Song selecting, or AUDIO
SELECT display for Audio selecting.
The available Songs or Audio files are listed on
the display.
If a USB flash memory is connected, pressing the
[SONG/AUDIO] button repeatedly toggles
between two displays: SONG SELECT and
AUDIO SELECT. If a USB flash memory is not
connected, this operation calls up only SONG
SELECT display.
3
Use the dial to select the desired Song
or Audio file.
When selecting Songs, refer to the list on page 34.
4
Press the [START/STOP] button to start
playback.
To stop playback, press the [START/STOP] button
again.
You can adjust the Song volume (page 64) and
Audio volume (page 64).
Adjusting the Tempo of a Song
Same procedure as with Style tempo. See page 60.
Playing Back a Song or Audio
File
• In order to play a file on a USB flash memory, the file
must be stored either in the USB flash memory’s root
directory or a first-level/ second-level folder in the root
directory. Files stored in third-level-folders created
inside a second-level folder cannot be selected and
played by this instrument.
SONG
AUDIO
Important
USB flash memory (Root)
File
File
File
File
Can be selected/
played
Cannot be selected/
played
• The tempo of audio playback cannot be changed.
AUDIO SELECT display
SONG SELECT display
When this is on, the functions printed
above the buttons are available.
NOTE