Owner`s manual

Setting Up
DGX-650 Owner’s Manual
19
Setting Up
Connecting a Computer (USB TO HOST terminal)
By connecting a computer to the USB TO HOST terminal, you can transfer data between the instrument and the
computer via MIDI. For details on using a computer with this instrument, refer to “Computer-related Operations”
on the website (page 9).
Turning the Power On/Off
Turn down the MASTER VOLUME control to “MIN”
then press the [ ] (Standby/On) switch to turn on the
power. While playing the keyboard, adjust the MAS-
TER VOLUME control. To turn off the power, press
the [ ] (Standby/On) switch again for a second.
• Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turn-
ing any components on or off, make sure to set all volume levels to minimum (0). Otherwise, damage to the components, electri-
cal shock, or even permanent hearing loss may occur.
CAUTION
USB terminal USB TO HOST terminal
USB cable
Instrument
• Use an AB type USB cable of less than 3 meters. USB 3.0
cables cannot be used.
• The instrument will begin transmission a short time after the
USB connection is made.
• When using a USB cable to connect the instrument to your
computer, make the connection directly without passing
through a USB hub.
• For information on setting up your sequence software, refer to
the owner’s manual of the relevant software.
NOTICE
NOTE
iPhone/iPad Connection
By connecting your iPhone or iPad to the USB TO
HOST terminal of this instrument and using applica-
tions, you can manage your music files more easily and
take advantage various functions. For details on con-
nection, refer to “iPhone/iPad Connection Manual”
downloadable from the website “Yamaha Downloads”
(page 9).
For information about available applications, access the
following page:
http://www.yamaha.com/kbdapps/
• When using a power adaptor, even when the power is off, a
small amount of electricity is still being consumed by the
instrument. When you are not using the instrument for a
long time, make sure to unplug the AC power adaptor from
the wall AC outlet.
CAUTION