Operation Manual

Basic
- 28 -
In Programme AE Mode, you can change the preset aperture value and shutter speed
without changing the exposure. This is called Programme Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Programme AE Mode.
Press the shutter button halfway and display the aperture value and
shutter speed value on the screen.
While the values are displayed (about
10 seconds), perform the Programme Shift
by rotating the rear dial.
• It will switch between Programme Shift operation and
Exposure Compensation operation (P74) every time
the rear dial is pressed while the values are
displayed.
• The Programme Shift indication A appears on the screen when Programme Shift is
activated.
• Programme Shift is cancelled if the camera is turned off or the rear dial is rotated until
the Programme Shift indication disappears.
∫ Example of Programme Shift
(A): Aperture value
(B): Shutter speed
1 Programme Shift amount
2 Programme Shift line chart
3 Programme Shift limit
Note
•
EV is an abbreviation of [Exposure Value], a unit indicating the amount of exposure. The EV
changes with the aperture value or the shutter speed.
• If the exposure is not adequate when the shutter button is pressed halfway, the aperture value
and shutter speed turns red.
• Programme Shift is cancelled and the camera returns to normal Programme AE Mode if more
than 10 seconds pass after Programme Shift is activated. However, the Programme Shift
setting is memorised.
• Depending on the brightness of the subject, Programme Shift may not be activated.
• Programme Shift is available in all ISO sensitivity settings except [ ].
Programme Shift
A
1 2 3 4 5 6 7 8 9 10 11 12 13
1 1
/
2
1
/
4
1
/
8
1
/
15
1
/
30
1
/
60
1
/
125
1
/
250
1
/
500
1
/
1000
1
/
2000
2
2.8
4
5.6
8
11
(B)
(A)
14