User Manual

3
Basic operation on the PM5D
24
PM5D/PM5D-RH V2 / DSP5D Owner’s Manual
Operating section
❏ Scroll bar
If the displayed items are too numerous to fit into a single
screen, you can use the scroll bar to view the portion that is
not currently displayed.
The DISPLAY ACCESS section contains keys that access
the desired function or screen in the display.
A Global functions
These keys access functions that affect the entire
PM5D.
B Output functions
These keys access functions that are related to output
channels.
C Input functions
These keys access functions that are related to input
channels.
When you press the key for the desired function, the screen
for that function will appear in the display. By repeatedly
pressing a key you can cycle through the screens included
in that function.
Hint
If you hold down the [SHIFT] key and press a key in the DIS-
PLAY ACCESS section, the screens included in that function
will appear in the reverse order (Previous Tab function). You
can also use the Previous Tab function by holding down a key
in the DISPLAY ACCESS section. If you rapidly press a key
twice, you will return to the first screen in that function.
Controllers used to edit settings and values in the display
are gathered into the data entry section.
A [DEC/CANCEL]/[INC/OK] keys
Use these keys to increase or decrease the value of the
parameter where the cursor is located. If the PM5D has
displayed a window asking you to confirm an opera-
tion such as recall or store, these buttons can be used
instead of the CANCEL button and OK button shown
in the window.
B CURSOR [ √ ]/[ ® ]/[ π ]/[ † ] keys
These keys are used to move the cursor to the desired
parameter.
C [SHIFT] key
This key can be used in conjunction with the CUR-
SOR [
√ ]/[ ® ]/[ π ]/[ † ] keys to move the cursor
rapidly, or in conjunction with the [DATA] encoder or
[DEC]/[INC] keys to change the parameter value
rapidly.
If you hold down the [SHIFT] key and press the
[ENTER] key, the JOB SELECT window will appear,
allowing you to set multiple parameters in a single
operation. (When you move the cursor to a parameter
for which there is a JOB SELECT window, an indica-
tion of “Job Select = [SHIFT] + [ENTER]” will
appear.)
D [ENTER] key
Use this key to switch a button at the cursor location
on/off, or to open a window.
E [DATA] encoder
Use this to increase or decrease the value of the param-
eter where the cursor is located. The parameter value
will change more rapidly if you turn the [DATA]
encoder while holding down the [SHIFT] key.
Scroll bar
DISPLAY ACCESS section
1
2
3
Data Entry section
2
1
6
3
7
4
5