Owner’s Manual

En 124
■ Parametric EQ
Adjusts the tone with an equalizer.
Settings
X
“YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “YPAO”
have already been saved (p.44). Press ENTER again to view the measurement results.
■ Manual equalizer adjustment
1
Set “Parametric EQ” to “Manual” and press ENTER.
2
Press ENTER again to enter the edit screen.
3
Use the cursor keys to select a speaker and press ENTER.
X
• To restore the default settings for all speakers, use the cursor keys to select “PEQ Data Clear”, press ENTER,
and then select “OK”.
• To copy the parametric equalizer values acquired with “YPAO” (p.44) to the “Manual” fields for fine
adjustment, select “PEQ Data Copy” and then an equalizer type.
4
Use the cursor keys to select a center frequency from the 7 preset bands (4 for subwoofer).
5
To fine-adjust the center frequency, Q factor (bandwidth) or gain, use the cursor keys to select
an item.
Freq.: Use the cursor keys to adjust the center frequency of the selected band.
Q: Use the cursor keys to adjust the Q factor (bandwidth) of the selected band.
Gain: Use the cursor keys to adjust the gain of the selected band.
Setting range
Center frequency: 15.6 Hz to 16.0 kHz (15.6 Hz to 250.0 Hz for subwoofer)
Q factor: 0.500 to 10.080
Gain: -20.0 dB to +6.0 dB
6
To exit from the menu, press SETUP.
Manual
Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
YPAO:Flat Adjusts individual speakers to achieve the same characteristics.
YPAO:Front
Adjusts individual speakers to achieve the same characteristics as the front
speakers.
YPAO:Natural Adjusts all speakers to achieve a natural sound.
Through
Does not use the equalizer.