Owner's Manual

13
For Other Component Control
Identify the remote control transmitter keys with your
component’s keys. If these keys are identical, their function will
be the same. On each key function, refer to the corresponding
instruction on your component’s manual.
➊ Tuner keys
Controls tuner
+: Selects higher preset station number.
–: Selects lower preset station number.
A/B/C/D/E Selects the page (A – E) of preset station
buttons.
➋ CD player keys
Controls compact disc player.
*
DISC SKIP is applicable only to compact disc changer.
➌ LD player keys (U.S.A., Canada and General models of
CX-2 only)
Controls LD player.
*
There are some models which have a key with both the
functions of PLAY and PAUSE.
➍ Tape deck keys
Controls tape deck.
*
DIR A, B and DECK A/B are applicable only to double
cassette tape deck.
*
For a single cassette deck with automatic reverse
function, pressing DIR A will reverse the direction of
tape running.
For Control of This Unit
➎
POWER
Turns the power on/off.
➏ Input selector keys
Selects input source.
➐ MUTING
When pressed, mutes the volume level. To resume original
volume level, press this again.
While muting, the indicator above the VOLUME control on
the front panel illuminates.
➑ VOLUME +/–
Turns the volume level up/down.
STANDBY mode
(For Europe model only)
While the power is on, pressing the POWER key on the remote
control transmitter switches the unit to the STANDBY mode.
(In this mode, the indicator is half illuminated.)
Note
To turn the power off completely, disconnect the AC
power plug from the wall outlet.
POWER POWER
POWER on mode STANDBY mode