Operation Manual
A 2DD and a 2HD disk can hold up to 60 song files each. A 2DD disk can hold about 110
files (of various types), and a 2HD disk can hold up to about 220 files.
This message appears when you try to produce more files than the disk is capable of
storing.
➾ Press the OK button, then delete any unnecessary files in the disk (page 123 in
the Owner’s Manual), or use a disk that has more available space.
A file with the same name exists.
➾ Press the OK button if you wish to overwrite the original file with new data, or
press CANCEL to abort the operation.
This message appears when you try to perform operations which cannot be done during
recording or playback, such as data conversion, etc.
➾ Stop song recording or playback, or exit from the recording/playback mode, then
perform the operation again.
This appears when you try to execute operations that cannot be performed during play-
back, such as changing the number of repeats of the Guide function.
➾ Stop song playback, or exit from the playback mode, then perform the operation
again.
A button that does not have a function in the current mode has been pressed.
This message appears when you try to execute other operations while reading data from
the disk or saving data.
➾ Wait until the data read/write operation is completed, then perform the operation
again.
This message appears when you attempt to execute another operation while writing ed-
ited data of a song recorded to internal RAM.
➾ Complete the data write operation, then perform the other operation.
This message appears when executing an operation that results in deleting data recorded
to the internal RAM, such as playback of disk software.
➾ Press YES to delete the data recorded to the internal RAM, then perform the de-
sired operation. Press the NO button if you want to keep the data.
This message appears when you attempt to record over or edit data of commercially
available software or data recorded on Clavinovas other than the CVP-94/92/98/96.
➾ Press YES to convert the data for recording/editing on the CVP-94/92/98/96.
Press NO if you don’t want to convert the data.
This message informs you of the number of times the disks must be exchanged when
copying a song to a different disk before starting the song copy operation. (See page 122
in the Owner’s Manual.)
Insert the destination disk to be copied. (See page 122 in the Owner’s Manual.)
When copying a song from the source disk to another disk, this message prompts you to
specify the song number in the destination disk to which the song is to be copied, when
the disk is first inserted. (See page 122 in the Owner’s Manual.)
● Song Copy Related Messages
Messages
3