Owner`s manual

CVP-601 Reference Manual 77

Mixing Console – Editing the Volume and Tonal Balance –

The instrument possesses a high grade five-band digital EQ. With this function, a final effect — tone control

— can be added to the output of your instrument. You can select one of the five preset EQ settings in the EQ

display. You can even create your own custom EQ settings by adjusting the frequency bands, and save the

settings to one of two User Master EQ types.

Editing and Saving the Selected Master EQ

Master Equalizer is EQ processing that is applied to the overall sound (except Audio) which is finally output

from the Effect block to the speakers or headphones.

1 Press the [F] (EDIT) button in the EQ Page of the Mixing Console display.

The MASTER EQ EDIT display is called up.

2 Use the [B]/[C] buttons to select a preset EQ type.

The set parameters of the selected EQ type are automatically shown at the bottom of the display.

3 Use the [3] – [7] buttons to boost or cut each of the five bands.

Use the [8] buttons to boost or cut all the five bands at the same time.

4 Adjust the Q (bandwidth) and the FREQ (center frequency) of the band selected in

step 3.

To adjust the bandwidth (also called “Shape” or “Q”), use the [1] buttons. The higher the value of Q,

the narrower the band width.

To adjust the FREQ (center frequency), use the [2] buttons. The available FREQ range is different for

each band.

5 Press the [H] or [I] (STORE 1 or 2) button to save the edited EQ type.

Up to two types of EQ can be created and saved. The saved EQ can be recalled from the EQ tab display by

using the [B]/[C] buttons.

Bandwidth (also called “Shape” or “Q”)

Gain

Freq

(Frequency)

5 bands 

LOW

EQ1

LOWMID

EQ2

MID

EQ3

HIGHMID

EQ4

HIGH

EQ5