Operation Manual

Connection

Internet Connection Guide 6

Connect the devices according to the example.

First turn the power of the instrument off, then connect the devices as shown in the illustration below, and ﬁnally

turn the power on again.

•For an illustration of the location of the USB TO DEVICE terminal, refer to the Owner’s Manual (Chapter 10).

• Only WEP encryption is available.

Press the [INTERNET] button.

Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER]

button to execute.

Required Devices

• USB wireless LAN adaptor

For a list of USB wireless LAN adaptors whose compatibility has been conﬁrmed by Yamaha, refer to the

website:

http://music.yamaha.com/download/

* The USB wireless LAN adaptor which is not on the list cannot be used.

• Access point with router (The router capability here is unnecessary if your modem has router capability.)

• Modem (ADSL modem, optical network unit or cable modem)

• About the conﬁrmation and changes in the setting of the access point with router side, read the owner’s manual for the product you are

using.

• Before installing a new router, check that the router performs normally by connecting via a computer.

Wireless LAN Connection Using USB LAN Adaptor

NOTE

USB wireless

LAN adaptor

USB TO

DEVICE

terminal

Access point

with router

Modem

Internet

Set the instrument within 10–20 m from the

access point. The signal will not be received if

there is an obstacle blocking reception.

Wireless

network

NOTE