Operation Manual

ManualsBrandsYamaha ManualsAudioCVP-505PM

Internet Connection Guide 1

Internet Connection Guide

CVP-509/505/503/501

PSR-S910/S710

Internet Connection Guide

Enjoy your instrument with Internet Direct Connection

This instrument can be directly connected to the Internet, conveniently letting you

display and access the special website from the instrument's display and enjoy the

various contents. This guide provides detailed instructions on connecting. You can

also refer to the Internet-related terms at the end of this guide. For the latest ser-

vices of the Internet Direct Connection function, refer to the Yamaha website:

http://services.music.yamaha.com/

• Only the special website can be opened when the instrument is directly connected

to the Internet.

NOTE

* The illustrations and screens as shown in this guide are for instructional purposes only, and may appear somewhat different from

those on your instrument.

* Clicking on the Internet-related terms (blue characters) in this guide jumps to the “Glossary of Terms” at the end.

Contents

Selection of the Connection Environment ................................................ 2

Connection ........................................................................................................ 3

LAN Cable Connection .................................................................................... 3

Wireless LAN Connection Using USB LAN Adaptor ....................................... 6

Wireless LAN Connection Using Wireless Game Adaptor ............................ 11

Using Static IP Address or Proxy Server ....................................................... 14

Connection Help............................................................................................. 18

Initialization of the Setup ............................................................................. 19

Glossary of Terms.......................................................................................... 20

Summary of content (20 pages)

PAGE 1
CVP-509/505/503/501 PSR-S910/S710 Internet Connection Guide Enjoy your instrument with Internet Direct Connection This instrument can be directly connected to the Internet, conveniently letting you display and access the special website from the instrument's display and enjoy the various contents. This guide provides detailed instructions on connecting. You can also refer to the Internet-related terms at the end of this guide.
PAGE 2
Selection of the Connection Environment To connect the instrument to the Internet, a full-time online connection (ADSL, optical fiber, cable Internet, etc.) using a broadband router or a modem equipped with a router is necessary. NOTE • Since no broadband router or modem settings can be made by the instrument itself, use a computer to make the settings before connecting to the instrument.
PAGE 3
Connection LAN Cable Connection 1 Connect the devices according to the example. First turn the power of the instrument off, then connect the devices as shown in the illustration below, and finally turn the power on again. NOTE • For an illustration of the location of the LAN terminal, refer to the Owner’s Manual (Chapter 10). LAN terminal Internet LAN cable Router cable Modem Required Devices • • • LAN cable Router cable (This is unnecessary if your modem has router capability.
PAGE 4
Connection 3 Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER] button to execute. 4 Use the [A]/[B] buttons to select “SETUP WIZARD.” 5 Press the [B] button to select “LAN cable,” then press the [G] button to proceed to “NEXT.” 6 Make sure that the devices are connected as shown in the illustration of the display, then press the [G] button to proceed to “NEXT.
PAGE 5
Connection 7 Press the [G](CONNECTION) button to check the connection to the special website. The settings are saved by checking the connection. NOTE • Because the settings are lost when you turn off the power of the instrument, be sure to save the settings and changes you made. 8 Press the [G](DONE) button to connect to the special website. When the special website appears, the network settings to the Internet are complete.
PAGE 6
Connection Wireless LAN Connection Using USB LAN Adaptor 1 Connect the devices according to the example. First turn the power of the instrument off, then connect the devices as shown in the illustration below, and finally turn the power on again. NOTE • For an illustration of the location of the USB TO DEVICE terminal, refer to the Owner’s Manual (Chapter 10). • Only WEP encryption is available. Set the instrument within 10–20 m from the access point.
PAGE 7
Connection 4 5 Use the [A]/[B] buttons to select “SETUP WIZARD.” Press the [D] button to select the “Wireless LAN using USB LAN adaptor,” then press the [G] button to proceed to “NEXT.” 6 Make sure that the devices are connected as shown in the illustration of the display. 7 Press the [G](NEXT) button to search for wireless network near the instrument.
PAGE 8
Connection 8 Use the [DATA ENTRY] dial to select the desired wireless network, then press the [G] button to proceed to “NEXT.” The SSID and channel of the selected wireless network are automatically set. Since the encrypted wireless network is displayed with padlock icon “ ,” input the WEP key. Make sure that the settings are the same as those for the access point on the router side.
PAGE 9
Connection 10 Input the WEP key. Refer to the Owner’s Manual (Starting Up) for character-entry details. To cancel the WEP key input, press the [8t](CANCEL) button. 11 Press the [G](NEXT) button to set the WEP key input. When you set the WEP key input, the characters are hidden and displayed as “******.” 12 Press the [G](CONNECTION) button to check the connection to the special website. The settings are saved by checking the connection.
PAGE 10
Connection 13 Press the [G](DONE) button to connect to the special website. When the special website appears, the network settings to the Internet are complete. When the special website does not appear, refer to “Connection Help” on page 18. For details on operations in the special website, refer to the Owner’s Manual (Chapter 9). Make a written note of the settings, in case you have to enter them again.
PAGE 11
Connection Wireless LAN Connection Using Wireless Game Adaptor 1 Connect the devices according to the example. First turn the power of the instrument off, then connect the devices as shown in the illustration below, and finally turn the power on again. NOTE • For an illustration of the location of the LAN terminal, refer to the Owner’s Manual (Chapter 10). Set the instrument within 10–20 m from the access point. The signal will not be received if there is an obstacle blocking reception.
PAGE 12
Connection 2 Press the [INTERNET] button. When the special website appears Since the instrument is connected to the special website, you do not need to make Internet settings. For details on operations in the special website, refer to the Owner’s Manual (Chapter 9). NOTE • The contents of the service as appearing here are current as of May, 2009. The available contents of the service are subject to change. When the special website does not appear Proceed to step 3.
PAGE 13
Connection 5 6 7 Press the [C] button to select “Wireless LAN using Wireless Game Adaptor,” then press the [G] button to proceed to “NEXT.” Make sure that the devices are connected as shown in the illustration of the display, then press the [G] button to proceed to “NEXT.” Press the [G](CONNECTION) button to check the connection to the special website. The settings are saved by checking the connection.
PAGE 14
Connection Using Static IP Address or Proxy Server Some cases may require detailed knowledge of the network settings. 1 2 Turn the power of the instrument on, then press the [INTERNET] button. Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER] button to execute. 3 Press the [C] button to select “ADVANCED SETTINGS.” 4 Use the TAB [<][>] buttons to call up the desired page.
PAGE 15
Connection 5 Use the [A]–[J] buttons to select the desired parameter. 6 Select the setting or change the value. For details on each parameter, refer to page 17. Selecting the setting Use the [2 st]/[3 st] buttons to select the setting, then use the [4 st](OK) buttons to execute. Changing the value Enter the value, then press the [8 s](OK) button to execute. Refer to the Owner’s Manual (Starting Up) for character-entry details.
PAGE 16
Connection 7 Use the [7 st] buttons to select “OK.” 8 Press the [G](YES) button to save the settings. NOTE • Because the settings are lost when you turn off the power of the instrument, be sure to save the settings and changes you made. 9 Connect the devices. First turn the power of the instrument off, then connect the devices, and finally turn the power on again. 10 Press the [INTERNET] button to connect to the special website.
PAGE 17
Connection Parameters IP INFORMATION DHCP Determines the DHCP ON/ON (SET DNS MANUALLY)/OFF settings. IP ADDRESS/SUBNET MASK/ GATEWAY Determines the IP ADDRESS/SUBNET MASK/GATEWAY settings. These settings must be made when DHCP above is set to “OFF.” DNS SERVER 1/2 These settings must be made when DHCP above is set to “ON (SET DNS MANUALLY)” or “OFF.” PROXY SERVER PROXY SERVER/PROXY PORT/ NON-PROXY SERVER Determines the proxy server name, port number and the host name for the non-proxy server.
PAGE 18
Connection Help If the instrument is not connected to the Internet, sometimes the [HELP] button appears on the display. You can view the solutions by selecting “HELP.” 1 2 3 Press the [G] button to select “HELP.” Use the [DATA ENTRY] dial to select a solution (Details), then press the [ENTER] button to view the details. Solve the problem with the displayed solutions. Use the [DATA ENTRY] dial to select the link, then press the [ENTER] button to see the comments.
PAGE 19
Initialization of the Setup 1 2 Press the [INTERNET] button. Use the [DATA ENTRY] dial to select “Set the Internet connection,” then press the [ENTER] button to execute. 3 Press the [E] button to select “INITIALIZE SETUP.” 4 Press the [G](YES) button to initialize the settings. CAUTION • This restores the network settings to the default settings.
PAGE 20
Glossary of Terms Access point A device that allows devices like your Yamaha instrument to connect to the Internet using a wireless network. Some access points are combined with the modem. broadband An Internet connection technology/service (such as ADSL and optical fiber) that allows for highspeed, high-volume data communication.