Operation Manual

CVP-509/505/503/501 Reference Manual 89

Connections – Using Your Instrument with Other Devices –

In this section, you can make MIDI-related settings for the instrument. The CVP-509/505/503/501 gives you

a set of ten pre-programmed templates that let you instantly and easily reconﬁgure the instrument to match

your particular MIDI application or external device. Also, you can edit the pre-programmed templates and

save up to ten of your original templates to the USER display.

NOTE You can save all your original templates as a single ﬁle to a USB storage device: [FUNCTION] → [J] UTILITY → TAB [E][F] SYSTEM RESET → [G]

MIDI SETUP FILES. See page 101.

1 Call up the operation display.

[FUNCTION] → [I] MIDI

2 Select a pre-programmed template from the PRESET Page (page 90).

If you have already created your original template and saved it to the USER Page, you can also select the

template from the USER Page.

3 Press the [8 ▼] (EDIT) button to call up the MIDI display to edit the selected template.

4 Use the TAB [E][F] buttons to call up the relevant setting display.

• SYSTEM MIDI System Settings (page 91)

• TRANSMIT MIDI Transmission Settings (page 92)

• RECEIVE MIDI Reception Settings (page 93)

• BASS Settings for the bass note of chord for Style playback via MIDI reception data

(page 94)

• CHORD DETECT Settings for the chord type for Style playback via MIDI reception data (page 94)

PERCUSSION The pedal plays a percussion instrument selected by the [4 ▲▼]–[8 ▲▼] but-

tons. You can use the keyboard to select the desired percussion instrument.

NOTE When you select the percussion instrument by pressing a key on the keyboard, the velocity with which you

press the key determines the percussion volume.

RIGHT 1 ON/OFF Same as the PART ON/OFF [RIGHT 1] button.

RIGHT 2 ON/OFF Same as the PART ON/OFF [RIGHT 2] button.

LEFT ON/OFF Same as the PART ON/OFF [LEFT] button.

OTS +/- Calls up the next/previous One Touch Setting.

MIDI Settings