Owner's Manual

CS1D Reference Manual (Hardware)
70
Select the items you wish to control from the DCA faders
The DCA GROUP block contains twelve DCA faders. In the default state of the PM1D system, you can use these faders to
control the input channel/output channel groups that are assigned to DCA 1–12. However, you can also make settings in
the DCA GROUP block FADER STATUS section to change the items that will be controlled by the DCA faders.
• When the FADER STATUS [IN] switch is on
You can use a DCA fader to directly adjust the input
levels of the individual input channels in a desired
INPUT block or ST IN block.
Use an INPUT [SEL] switch to select the INPUT
block or ST IN block. (The INPUT block or ST IN
block that includes the channel selected by the
INPUT [SEL] switch will be assigned to the DCA
faders.)
• When a FADER STATUS [1–12]/[13–24]/[25–36]/
[37–48] switch is on
The DCA faders will directly control the output lev-
els of the corresponding MIX channels 1–12, 13–24,
25–36, or 37–48.
• When the FADER STATUS [DCA] switch is on
The DCA faders will control the levels of DCA
groups 1–12.
Items that can be controlled from the DCA faders
FADER STATUS section
Hint
In addition, it is possible to split up the 31-band
graphic EQ and assign it to the DCA faders in 12-
band units to adjust the boost/cut amount for each
band. In order to do this, display the GEQ function
GEQ PARAMETER screen, then hold down the
[SHIFT/GRAB] switch and press a FADER STATUS
section [1–12]/[13–24]/[25–36] switch to call the
state of the selected frequency band into the DCA
faders.
Alternatively, you can click the ASSIGN TO DCA
FADERS button in the GEQ PARAMETER screen.
• GEQ PARAMETER screen
The input channels of the INPUT block or the ST
IN channels of the ST IN block currently selected
by the [SEL] switch.
MIX channels 1–12
MIX channels 13–24
MIX channels 25–36
MIX channels 37–48
DCA groups 1–12
Boost/cut for each band of the graphic EQ
123456789101112
IN
1–12
13–24
25–36
37–48
DCA
IN
1–12
13–24
25–36
37–48
DCA
1–12
13–24
25–36
1.60k–20.0k
200–2.50k
20–250
1–12
+
13–24
+
25–36
+
ASSIGN TO DCA
FADERS button