Owner`s manual

12
4 Block Size
The data block size of the CRW6416S can be set to 512 bytes per sector by
setting the Block Size jumper switch to “on.” This is necessary when installing
the CRW6416S on a UNIX-based workstation. It is not necessary for Windows
95/98/NT computers.
n By factory default, the Block Size jumper switch is set to “off” and should normally be left in
this state.
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
1 2 4
Block size off (Default)
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
1 2 4
Block size on
Set to “on” when installing
CRW6416S drive on UNIX
workstation
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
1 2 4
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
1 2 4
Termination on (Default) Termination off
Set to “on” if CRW6416S drive
is last device on SCSI chain
Installation
6416S_e15.qx 6/29/99 6:00 PM Page 19