CD Recorder Owner's Manual

Chapter 2 - Installing the Yamaha CRW4261t Drive

3. Your hands or body may be holding a charge of static elec-

tricity.

Touch a metallic portion of the chassis or power supply to

release any such charge.

4. Remove the front cover of a vacant half-height drive bay.

For details refer to the manual of your computer.

5. Slide the CRW4261t drive into the drive bay from the front.

At this time, be careful not to apply excessive force to the drive itself.

Finger-tighten the four fastening screws, and check that there is enough

room to connect the power supply cable, IDE interface connector, and

AUDIO cables.