Specifications

CP4 STAGE/CP40 STAGE Owner’s Manual 53
Appendix
Data exchange with a connected
computer is not working properly.
 Ensure that the computer’s port settings are
correct.
 Ensure that the correct interface (MIDI or USB)
has been selected in the Utility area.
• Press [UTILITY]; select 02: MIDI and press [ENTER];
set IN/OUT to “MIDI” or “USB” as required.
Transmission and reception of bulk data
is not working properly.
 If you are having trouble transmitting data,
ensure that the stage piano’s device number
setting matches the device number of the
connected MIDI device.
• Press [UTILITY]; select 02: MIDI and press [ENTER];
confirm or change the device number using DevNo.
 If you are having trouble receiving data,
ensure that the device number setting is
identical to that used when transmitting the
data.
• Press [UTILITY]; select 02: MIDI and press [ENTER];
set the device number using DevNo.
Data cannot be saved on the connected
USB flash-memory device.
 Ensure that the USB flash-memory device is
not write protected.
 Ensure that the USB flash-memory device is
correctly formatted.
• Press [FILE]; select 05: Format and press [ENTER];
press [+1/YES].
NOTICE
When a USB flash-memory device is formatted, all data
saved on it will be permanently erased. Before formatting,
therefore, ensure that the USB flash-memory device
contains no irreplaceable data.