User Manual
-
-
-
-
-
-
-
Settings for Song Recording and Playback—Song Settings
CP300 Owner’s Manual
87
Reference
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
n When you clear all channels using the “ALL” parameter,
you can overwrite the Song. In this case, an empty Song
file having no channel data is saved.
This allows you to specify a section within a Song and play
it back repeatedly. The section can be specified freely (in
measures/beats), and playback repeats after it reaches the
point just prior to the beat specified as the end point.
If you start playing back a Song with “Repeat On” selected,
a lead-in count starts, followed by the repeated playback of
the specified part until you press the [STOP] button. If you
select “Repeat Off,” normal playback starts.
Settings: RepeatOn, RepeatOff
Default setting: RepeatOff
If you select “Repeat On,” use the C [–][+] and D [–][+] buttons
to specify the range to be repeated during Song playback.
n When you select another Song, the specified range is
automatically cancelled and the Repeat function is turned
off.
This allows you to repeatedly play back all Songs or a single
Song selected from storage memory.
When you start playback, the CP300 plays the Song you
selected from the front panel, then starts repeat playback of
the specified Songs until you press the [STOP] button.
Press the [STOP] button to return to the top of the Song.
Settings:
Default setting: PresetSongs
This allows you to set the time signature of the click.
Specify the numerator of the time signature by using the
C [–][+] buttons and specify the denominator by using the
D [–][+] buttons. For example, to specify 3/4 time, use the
C [–][+] buttons to select “3” and the D [–][+] buttons to
select “4.”
Setting range for the numerator: 1 – 16
Setting options for the denominator: 2, 4, 8
Default setting: 4/4
This allows you to set volume of the click sound.
Setting range: 0 – 127
Default setting: 100
This allows you to select whether the click sound has a bell
accent, or plays only a click sound.
Setting range:
Default setting: BellOff
From/To Repeat
Song Repeat
PresetSongs All Preset Songs
All All Memory Songs and Preset Songs
OneSong One Song selected from the front panel
MemorySongs All recorded Songs
FromToRepeat RepeatOff
From 001:001 To 002:001
NO YES
A
B
DC
SongRepeat Off
PresetSongs
NO YES
A
B
DC
Time Signature
Click Volume
Click Type
BellOff Click (standard click sound)
BellOn Click and bell
TimeSignature
4/ 4
NO YES
A
B
DC
ClickVolume
100
NO YES
A
B
DC
ClickType
BellOff
NO YES
A
B
DC
-
-
-
Settings for Song Recording and Playback—Song Settings
CP300 Owner’s Manual
87
Reference
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
n When you clear all channels using the “ALL” parameter,
you can overwrite the Song. In this case, an empty Song
file having no channel data is saved.
This allows you to specify a section within a Song and play
it back repeatedly. The section can be specified freely (in
measures/beats), and playback repeats after it reaches the
point just prior to the beat specified as the end point.
If you start playing back a Song with “Repeat On” selected,
a lead-in count starts, followed by the repeated playback of
the specified part until you press the [STOP] button. If you
select “Repeat Off,” normal playback starts.
Settings: RepeatOn, RepeatOff
Default setting: RepeatOff
If you select “Repeat On,” use the C [–][+] and D [–][+] buttons
to specify the range to be repeated during Song playback.
n When you select another Song, the specified range is
automatically cancelled and the Repeat function is turned
off.
This allows you to repeatedly play back all Songs or a single
Song selected from storage memory.
When you start playback, the CP300 plays the Song you
selected from the front panel, then starts repeat playback of
the specified Songs until you press the [STOP] button.
Press the [STOP] button to return to the top of the Song.
Settings:
Default setting: PresetSongs
This allows you to set the time signature of the click.
Specify the numerator of the time signature by using the
C [–][+] buttons and specify the denominator by using the
D [–][+] buttons. For example, to specify 3/4 time, use the
C [–][+] buttons to select “3” and the D [–][+] buttons to
select “4.”
Setting range for the numerator: 1 – 16
Setting options for the denominator: 2, 4, 8
Default setting: 4/4
This allows you to set volume of the click sound.
Setting range: 0 – 127
Default setting: 100
This allows you to select whether the click sound has a bell
accent, or plays only a click sound.
Setting range:
Default setting: BellOff
From/To Repeat
Song Repeat
PresetSongs All Preset Songs
All All Memory Songs and Preset Songs
OneSong One Song selected from the front panel
MemorySongs All recorded Songs
FromToRepeat RepeatOff
From 001:001 To 002:001
NO YES
A
B
DC
SongRepeat Off
PresetSongs
NO YES
A
B
DC
Time Signature
Click Volume
Click Type
BellOff Click (standard click sound)
BellOn Click and bell
TimeSignature
4/ 4
NO YES
A
B
DC
ClickVolume
100
NO YES
A
B
DC
ClickType
BellOff
NO YES
A
B
DC
-
Settings for Song Recording and Playback—Song Settings
CP300 Owner’s Manual
87
Reference
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
n When you clear all channels using the “ALL” parameter,
you can overwrite the Song. In this case, an empty Song
file having no channel data is saved.
This allows you to specify a section within a Song and play
it back repeatedly. The section can be specified freely (in
measures/beats), and playback repeats after it reaches the
point just prior to the beat specified as the end point.
If you start playing back a Song with “Repeat On” selected,
a lead-in count starts, followed by the repeated playback of
the specified part until you press the [STOP] button. If you
select “Repeat Off,” normal playback starts.
Settings: RepeatOn, RepeatOff
Default setting: RepeatOff
If you select “Repeat On,” use the C [–][+] and D [–][+] buttons
to specify the range to be repeated during Song playback.
n When you select another Song, the specified range is
automatically cancelled and the Repeat function is turned
off.
This allows you to repeatedly play back all Songs or a single
Song selected from storage memory.
When you start playback, the CP300 plays the Song you
selected from the front panel, then starts repeat playback of
the specified Songs until you press the [STOP] button.
Press the [STOP] button to return to the top of the Song.
Settings:
Default setting: PresetSongs
This allows you to set the time signature of the click.
Specify the numerator of the time signature by using the
C [–][+] buttons and specify the denominator by using the
D [–][+] buttons. For example, to specify 3/4 time, use the
C [–][+] buttons to select “3” and the D [–][+] buttons to
select “4.”
Setting range for the numerator: 1 – 16
Setting options for the denominator: 2, 4, 8
Default setting: 4/4
This allows you to set volume of the click sound.
Setting range: 0 – 127
Default setting: 100
This allows you to select whether the click sound has a bell
accent, or plays only a click sound.
Setting range:
Default setting: BellOff
From/To Repeat
Song Repeat
PresetSongs All Preset Songs
All All Memory Songs and Preset Songs
OneSong One Song selected from the front panel
MemorySongs All recorded Songs
FromToRepeat RepeatOff
From 001:001 To 002:001
NO YES
A
B
DC
SongRepeat Off
PresetSongs
NO YES
A
B
DC
Time Signature
Click Volume
Click Type
BellOff Click (standard click sound)
BellOn Click and bell
TimeSignature
4/ 4
NO YES
A
B
DC
ClickVolume
100
NO YES
A
B
DC
ClickType
BellOff
NO YES
A
B
DC
Settings for Song Recording and Playback—Song Settings
CP300 Owner’s Manual
87
Reference
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
n When you clear all channels using the “ALL” parameter,
you can overwrite the Song. In this case, an empty Song
file having no channel data is saved.
This allows you to specify a section within a Song and play
it back repeatedly. The section can be specified freely (in
measures/beats), and playback repeats after it reaches the
point just prior to the beat specified as the end point.
If you start playing back a Song with “Repeat On” selected,
a lead-in count starts, followed by the repeated playback of
the specified part until you press the [STOP] button. If you
select “Repeat Off,” normal playback starts.
Settings: RepeatOn, RepeatOff
Default setting: RepeatOff
If you select “Repeat On,” use the C [–][+] and D [–][+] buttons
to specify the range to be repeated during Song playback.
n When you select another Song, the specified range is
automatically cancelled and the Repeat function is turned
off.
This allows you to repeatedly play back all Songs or a single
Song selected from storage memory.
When you start playback, the CP300 plays the Song you
selected from the front panel, then starts repeat playback of
the specified Songs until you press the [STOP] button.
Press the [STOP] button to return to the top of the Song.
Settings:
Default setting: PresetSongs
This allows you to set the time signature of the click.
Specify the numerator of the time signature by using the
C [–][+] buttons and specify the denominator by using the
D [–][+] buttons. For example, to specify 3/4 time, use the
C [–][+] buttons to select “3” and the D [–][+] buttons to
select “4.”
Setting range for the numerator: 1 – 16
Setting options for the denominator: 2, 4, 8
Default setting: 4/4
This allows you to set volume of the click sound.
Setting range: 0 – 127
Default setting: 100
This allows you to select whether the click sound has a bell
accent, or plays only a click sound.
Setting range:
Default setting: BellOff
From/To Repeat
Song Repeat
PresetSongs All Preset Songs
All All Memory Songs and Preset Songs
OneSong One Song selected from the front panel
MemorySongs All recorded Songs
FromToRepeat RepeatOff
From 001:001 To 002:001
NO YES
A
B
DC
SongRepeat Off
PresetSongs
NO YES
A
B
DC
Time Signature
Click Volume
Click Type
BellOff Click (standard click sound)
BellOn Click and bell
TimeSignature
4/ 4
NO YES
A
B
DC
ClickVolume
100
NO YES
A
B
DC
ClickType
BellOff
NO YES
A
B
DC
Settings for Song Recording and Playback—Song Settings
CP300 Owner’s Manual
87
Reference
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
n When you clear all channels using the “ALL” parameter,
you can overwrite the Song. In this case, an empty Song
file having no channel data is saved.
This allows you to specify a section within a Song and play
it back repeatedly. The section can be specified freely (in
measures/beats), and playback repeats after it reaches the
point just prior to the beat specified as the end point.
If you start playing back a Song with “Repeat On” selected,
a lead-in count starts, followed by the repeated playback of
the specified part until you press the [STOP] button. If you
select “Repeat Off,” normal playback starts.
Settings: RepeatOn, RepeatOff
Default setting: RepeatOff
If you select “Repeat On,” use the C [–][+] and D [–][+] buttons
to specify the range to be repeated during Song playback.
n When you select another Song, the specified range is
automatically cancelled and the Repeat function is turned
off.
This allows you to repeatedly play back all Songs or a single
Song selected from storage memory.
When you start playback, the CP300 plays the Song you
selected from the front panel, then starts repeat playback of
the specified Songs until you press the [STOP] button.
Press the [STOP] button to return to the top of the Song.
Settings:
Default setting: PresetSongs
This allows you to set the time signature of the click.
Specify the numerator of the time signature by using the
C [–][+] buttons and specify the denominator by using the
D [–][+] buttons. For example, to specify 3/4 time, use the
C [–][+] buttons to select “3” and the D [–][+] buttons to
select “4.”
Setting range for the numerator: 1 – 16
Setting options for the denominator: 2, 4, 8
Default setting: 4/4
This allows you to set volume of the click sound.
Setting range: 0 – 127
Default setting: 100
This allows you to select whether the click sound has a bell
accent, or plays only a click sound.
Setting range:
Default setting: BellOff
From/To Repeat
Song Repeat
PresetSongs All Preset Songs
All All Memory Songs and Preset Songs
OneSong One Song selected from the front panel
MemorySongs All recorded Songs
FromToRepeat RepeatOff
From 001:001 To 002:001
NO YES
A
B
DC
SongRepeat Off
PresetSongs
NO YES
A
B
DC
Time Signature
Click Volume
Click Type
BellOff Click (standard click sound)
BellOn Click and bell
TimeSignature
4/ 4
NO YES
A
B
DC
ClickVolume
100
NO YES
A
B
DC
ClickType
BellOff
NO YES
A
B
DC