Musical Instrument Owner's Manual
Table Of Contents
- PRECAUTIONS
- Table of contents
- Application Index Use this index to find reference pages that may be helpful for your application...
- Handling the Floppy Disk Drive(FDD) and Floppy Disk
- Maintenance
- Included Accessories
- Features
- Before Using the Clavinova
- Part Names
- Listening to the Demonstration Tunes
- Listening to 50 Piano Preset Songs
- Selecting and Playing Voices
- Recording Your Performance
- Saving Recorded Songs and Handling the Files...[FILE]
- Clavinova memory
- Basic file operation
- Saving recorded or other songs to Clavinova Storage memory...[SaveToMemory]
- Saving recorded or other songs to floppy disk...[SaveToDisk]
- Deleting songs in Clavinova Storage memory or a floppy disk...[DeleteSong]
- Renaming a song...[RenameSong]
- Copying data from one floppy disk to another...[CopyDisk]
- Formatting a floppy disk...[FormatDisk]
- Changing the type of characters on screen...[CharacterCode]
- Playing Back Recorded Songs and Commercially-available Music Data
- Connections
- Detailed Settings
- Detailed settings for recording and playback [SONG SETTING]
- Correcting note timing [Quantize]
- Specifying whether playback starts immediately along with the first voicing [QuickPlay]
- Auditioning the channels [ChannelListen]
- Deleting data from each channel [ChannelClear]
- Specifying the range and playing back repeatedly [FromToRepeat]
- Playing back the phrase specified by the phrase number [PhraseMark]
- Playing back a song repeatedly [SongRepeat]
- Detailed settings for the metronome METRONOME [SETTING]
- Detailed settings for the voices [VOICE SETTING]
- Setting the octave [Octave]*
- Setting the volume level [Volume]*
- Setting the position of right and left channels [Pan]*
- Fine tuning the pitch (only in Dual mode) [Detune]
- Selecting the reverb type [ReverbType]
- Setting the reverb depth [ReverbSend]*
- Selecting the chorus type [Chorus Type]
- Setting the chorus depth [ChorusSend]*
- Setting the chorus on/off [ChorusOnOff]
- Selecting the variation effect type [VariationType]
- Setting the variation effect depth [VariationSend]*
- Setting the touch sensitivity [TouchSense]*
- Setting the right pedal function [RPedal]
- Setting the center pedal function [MPedal]
- Setting the left pedal function [LPedal]
- Setting the auxiliary pedal function [AuxPedal]
- MIDI [MIDI SETTING]
- About MIDI
- Setting the MIDI transmit channel [MidiOutChannel]
- Setting the MIDI receive channel (Port A) [MidiInAChannel]
- Setting the MIDI receive channel (Port B) [MidiInAChannel]
- Setting Local control on/off [LocalControl]
- Selecting performance from the keyboard or song data for MIDI transmission [MidiOutSelect]
- Selecting a type of data received via MIDI [ReceiveParameter]
- Selecting a type of data transmitted via MIDI [TransmitParameter]
- Executing song data bulk dump [SongBulkDump]
- Transmitting the initial settings on the panel [InitialSetup]
- Executing voice data bulk dump [VoiceBulkDump]
- About MIDI
- Other settings
- Selecting a touch response [TouchResponse]
- Fine tuning the pitch [Tune]
- Selecting a tuning curve for a piano voice [PianoTuningCurve]
- Selecting a scale [Scale]
- Depth of string resonance [StringResonanceDepth]
- Depth of sustain sampling for the damper pedal [SustainSamplingDepth]
- Setting the speed of vibraphone’s vibrato effect [VibraphoneRotorSpeed]
- Selecting a pedal function for vibraphone [VibraphonePedalMode]
- Assigning the START/PAUSE function to a pedal [PedalStart/ Pause]
- Selecting a type of auxiliary pedal [AuxPedalType]
- Setting the point at which the damper pedal starts to affect the sound [HalfPedalPoint]
- Pitch bend range [PitchBendRange]
- Replacing the XG voices with preset voices [XGAlternative]
- Selecting items saved at shutdown [MemoryBackUp]
- Restoring the normal (default) settings [FactorySet]
- Other method for restoring the normal settings
- Message List
- Questions about Operations and Functions
- Troubleshooting
- Data Compatibility
- Preset Voice List
- Voice Combination Examples (Dual and Split)
- Index
CLP-990 101
Data Compatibility
This section covers basic information on data compatibility: whether or not other MIDI devices can playback the
data recorded by CLP-990, and whether or not the CLP-990 can playback commercially available song data or song
data created for other instruments or on a computer.
Depending on the MIDI device or data characteristics, you may be able to play back the data without any problem,
or you may have to perform some special operations before the data can be played back. If you run into problems
playing back data, please refer to the information below.
Basic Check Points
The data and the MIDI device must match in regards
to the items below.
• Disk Format
• Sequence format
• Voice allocation format
Disk format
Floppy disks are the main storage medium for data
used with various devices, including computers. Dif-
ferent devices have different systems of saving data,
therefore it is necessary to first configure the floppy
disk to the system of the device being used. This opera-
tion is called “formatting.”
• There are two types of floppy disks: MF2DD (dou-
ble sided, double density) and MF2HD (double
sided, high density), and each type has different for-
matting systems.
• CLP-990 can record and playback with both types of
floppy disks.
• When formatted by the CLP-990, a 2DD disk saves
up to 720 KB (kilobytes) and a 2HD disk saves up to
1.44 MB (megabytes). (The figures “720 KB” and
“1.44 MB” indicate the data memory capacity. They
are also used to indicate the format type of disk.)
• Playback is only possible when the MIDI device to
be used is compatible with the format of the disk.
Sequence Format
The system which records song data is called “sequence
format.”
• Playback is only possible when the sequence format
of the disk matches that of the MIDI device.
[Common Sequence Formats]
■
SMF (Standard MIDI File)
This is the most common sequence format.
• Standard MIDI Files are generally available as one
of two types: Format 0 or Format 1.
• Many MIDI devices are compatible with Format
0, and most commercially available software is
recorded as Format 0.
• The CLP-990 is compatible with both Format 0
and Format 1 (for Format 1, up to a maximum of
17 chunks).
• Performance data recorded on the CLP-990 is
saved in the SMF format 0 in a floppy disk.
■
ESEQ
This sequence format is compatible with many of
Yamaha’s MIDI devices, including the Clavinova
series instruments. This is a common format used
with various Yamaha software.
• The CLP-990 is compatible with ESEQ.