Operation Manual

64
Detailed Settings
Detailed settings for Voices — [VOICE SETTING]
This will be displayed only if VibeRotor is selected for the
DSP Type parameter explained above. It turns on/off the
vibrato effect that is applied when you use the VibeRotor
pedal.
Setting range:
On/Off
Default setting:
Differs depending on the Voice.
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above. It sets the rotation
speed of the rotary speaker effect.
Setting range:
Slow/Fast
Default setting:
Differs depending on the Voice.
This sets the depth of the DSP effect (page 63). Some DSP
Type settings do not allow you to set the DSP Depth.
Setting range:
1 (output only the original sound with almost no effect applied) –
127 (output only the sound processed by the effect)
Default setting:
Differs depending on the Voice.
NOTE
Brightness may have little audible effect or not be applied to some
Voices.
Setting range:
-64 – +63 (The higher the value, the brighter the sound.)
Default setting:
Differs depending on the Voice.
Resonance can produce a distinctive “peaky” tone,
making the sound brighter and harder.
NOTE
Harmonic content may have little audible effect or not be applied
to some Voices.
Setting range:
-64 – +63
Default setting:
Differs depending on the Voice.
This parameter enables determines the manner and
degree to which the volume level changes in response to
your touch on the keyboard (how hard you play). Since
Turning the Vibraphone vibrato effect
on/off*
VibeRotorOnOff
Setting the rotation speed of the
rotary speaker*
RotarySpeed
Adjusting the depth of the DSP effect*
DSP Depth
VibeRotorOnOff Set?
_
>
Main(GrndPno ) Off
Store the setting.
Set the value.Select a Voice part.
RotarySpeed Set?
_
>
Main(GrndPno ) Slow
Store the setting.
Set the value.Select a Voice part.
DSP Depth Set?
_
>
Main(GrndPno ) 26
Store the setting.
Set the value.Select a Voice part.
Adjusting the brightness of the
sound*
Brightness
Adjusting the resonance effect*
HarmonicContent
Setting the touch sensitivity*
TouchSense
Brightness Set?
_
>
Main(GrndPno ) 0
Store the setting.
Set the value.Select a Voice part.
HarmonicContent Set?
_
>
Main(GrndPno ) 0
Store the setting.
Set the value.Select a Voice part.