Operation Manual

61
Detailed Settings
Detailed settings for Voices — [VOICE SETTING]
Detailed settings for Voices — [VOICE SETTING]
This menu enables you to make various detailed Voice settings such as Dual, Split, Acoustic Effects, and the
pedal functions. You can make these settings for each Voice (or each combination of Voices) individually.
You can change the settings while playing the keyboard and listening to the sound.
Select a Voice or Voices (Voices 1 – 2 for the right hand and Voices 1 – 2 for the left hand), press
the [VOICE SETTING] to enter the Voice Setting mode then use the A [–][+] buttons to select
the desired item.
Use the C [–][+] buttons to select a Voice part to which the setting is applied, then make the
setting of the selected item.
Voice part
•Main
When this is selected, the setting is applied to Voice 1 for the
right hand.
• M.L. (Main Layer)
Available when the right hand area is in the Dual mode. When
this is selected, the setting is applied to Voice 2 for the right
hand.
• Main × Layer
Available when the right hand area is in the Dual mode. When
this is selected, the setting is applied to both Voice 1 and Voice
2 for the right hand.
•Left
Available when the instrument is in the Split mode. When this is
selected, the setting is applied to Voice 1 for the left hand.
• L.L. (Left Layer)
Available when the instrument is in the Split mode and the left
hand area is in the Dual mode. When this is selected, the
setting is applied to Voice 2 for the left hand.
• Left × Layer
Available when the instrument is in the Split mode and the left
hand area is in the Dual mode. When this is selected, the
setting is applied to both Voice 1 and Voice 2 for the left hand.
The pitch of a note can be shifted upward or downward in
steps of an octave.
Setting range:
-2 (two octaves lower) – 0 (no pitch shift) – +2 (two octaves higher)
Default setting:
Differs depending on the Voice.
You can set the volume level for each Voice part.
Setting range:
0 – 127
Default setting:
Differs depending on the Voice.
Select the parameters to be set.
Select the Voice part.
[VOICE SETTING] button
In the Dual mode, parameters with the “*” mark are set for Voice 1 and Voice 2 individually.
Setting the octave*
Octave
Octave Set?
_
>
Main(GrndPno ) 0
Store the setting.
Set the value.Select a Voice part.
Setting the volume level*
Volume
Volume Set?
_
>
Main(GrndPno ) 100
Store the setting.
Set the value.Select a Voice part.