Owner's Manual

English

EDITING

■ Entering characters in the edit

Entering the title characters by using the

MULTI JOG knob

1. Rotate the MULTI JOG knob.

When the MULTI JOG knob is rotated clockwise, characters

appear in the order of alphabetical capital letters, alphabetical

lower case letters, numbers, and symbols.

2. Press the MULTI JOG knob to confirm the selected

character.

The cursor moves to the next space. Repeat steps 1 and 2 until

the title is complete. A title can contain up to 32 characters.

Entering the title characters by using the

alphabetical/numeric buttons on the remote

control

1. Select the character to be used for the title by using

the alphabetical/numeric buttons on the remote

control.

Alphabetical capital letters, alphabetical lower case letters, and

numbers switch each time the buttons are pressed. To insert a

space, press SPACE. To use a symbol, press SYMBOL to select

the desired symbol.

2. Select the next character by pressing one of the

alphabetical/numeric buttons.

The cursor automatically moves to the next space. When you

need to use the button same to step 1, press Y to move the

insertion point, then press the alphabetical/numeric button.

Correcting the characters

Move the cursor to the character to be corrected by pressing

t/e or r/y (T or Y on the remote control). To clear the

selected character, press CLEAR. To insert a character before the

selected character, use the MULTI JOG knob or alphabetical/

numeric buttons to select the character.

LIST OF EDIT MENU

105_HD1500(E)50-57.p65 3/18/05, 15:4351