Compact Disc Recorder Owner's Manual

ManualsBrandsYamaha ManualsCD PlayerCDR-D651

DISC B

Recordable

ReWritable

COPY

REC MODE TRACK NO.

FINALIZE ERASE

INPUT

MULTI JOG

DIGITAL REC LEVEL

DISC A DIGITAL ANALOG

PUSH MODE

ANALOG REC LEVEL

MINFADE IN

OUT MAX

REC MUTE

REC

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Malaysia V647770-1

UCA

CDR-D651

Compact Disc Recorder

Lecteur/Enregistreur CD

OWNER'S MANUAL

MODE D'EMPLOI

VARO!

AVATTAESSA JA SUOJALUKITUS OHITETTAESSA

OLET ALTTIINA NÄKYMÄTTÖMÄLLE

LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.

VARNING!

OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR

ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD.

BETRAKTA EJ STRÅLEN.

(For U.K., Europe, General models)

(For U.K., Europe, General, and Australia models)

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

ATTENTION

L’emploi de commandes, de réglages ou un choix de

procédures différents des spécifications de cette

brochure peut entraîner une exposition à d’éventuelles

radiations pouvant être dangereses.

ACHTUNG

Die Verwendung von Bedienungselementen oder

Einstellungen oder die Durchführung von

Bedienungsvorgängen, die nicht in dieser Anleitung

aufgeführt sind, kann zu einem Kontakt mit

gefährlichen Laserstrahlen führen.

OBSERVERA

Användning av kontroller och justeringar eller

genomförande av procedurer andra än de som

specificeras i denna bok kan resultera i att du utsätter

dig för farlig strålning.

ATTENZIONE

Uso di controlli o regolazioni o procedure non

specificamente descritte può causare l’esposizione a

radiazioni di livello pericoloso.

PRECAUCIÓN

El uso de los controles o los procedimientos de ajuste

o utilización diferentes de los especificados en este

manual pueden causar una exposición peligrosa a la

radiación.

VOORZICHTIG

Gebruik van bedieningsorganen of instellingen, of

uitvoeren van handelingen anders dan staan

beschreven in deze handleiding kunnen leiden tot

blootstelling aan gevaarlijke stralen.

CLASS 1 LASER PRODUCT

LASER KLASSE 1 PRODUKT

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

CAUTION - VISIBLE AND

OR INBISIBLE LASER RADIATION

WHEN OPEN. AVOID EXPOSURE TO BEAM.

VARNING -

SYNLIG OCH

ELLER OSYNLIG LASERSTRÅLNING NÄR

DENNA DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.

VARNING SYNLIG OCH

ELLER OSYNLIG LASERSTRÅLNING NÄR

DENNA DEL ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.

VARO !

AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA

TAI

NÄKYMÄTÖMÄLLE LASERSÄTEILYLLE.

ÄLÄ KATSO SÄTEESEEN.

VORSICHT !

SICHTBARE UND

ODER UNSICHTBARE

LASERATRAHLUNG WENN ABDECKUNG GEÖFFNET.

NICHT DEM STRAHL AUSSETZEN.

ANALOG

LINE IN

REC

PLAY

LINE OUT

DIGITAL

OPTICAL

IN OUT

CLASS 1 LASER PRODUCT

LASER KLASSE 1 PRODUKT

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

ANALOG

LINE IN

REC

PLAY

LINE OUT

DIGITAL

OPTICAL

IN OUT

CLASS 1 LASER PRODUCT

LASER KLASSE 1 PRODUKT

LUOKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

CAUTION - VISIBLE AND

OR INBISIBLE LASER RADIATION

WHEN OPEN. AVOID EXPOSURE TO BEAM.

VARNING -

SYNLIG OCH

ELLER OSYNLIG LASERSTRÅLNING NÄR

DENNA DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.

VARNING SYNLIG OCH

ELLER OSYNLIG LASERSTRÅLNING NÄR

DENNA DEL ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.

VARO !

AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA

TAI

NÄKYMÄTÖMÄLLE LASERSÄTEILYLLE.

ÄLÄ KATSO SÄTEESEEN.

VORSICHT !

SICHTBARE UND

ODER UNSICHTBARE

LASERATRAHLUNG WENN ABDECKUNG GEÖFFNET.

NICHT DEM STRAHL AUSSETZEN.

Summary of content (33 pages)

PAGE 1
UCA CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT ATTENTION L’emploi de commandes, de réglages ou un choix de procédures différents des spécifications de cette brochure peut entraîner une exposition à d’éventuelles radiations pouvant être dangereses.
PAGE 2
GETTING STARTED ENGLISH Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.
PAGE 3
PRECAUTIONS: READ THIS BEFORE OPERATING THIS UNIT ............ • To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. • Install this unit in a well ventilated, cool, dry, clean place with at least 5 cm of ventilation space on the top, right and left, and at the back of this unit – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. insert the transportation pad in the disc tray.
PAGE 4
....................................... DISCS COMPATIBLE WITH THIS UNIT ■ Discs that can be played back Be sure to use only CD-R and CD-RW discs made by reliable manufacturers. CD-R and CD-RW digital audio discs that display either of the following marks can be used with this unit. In addition to CD-R and CD-RW digital audio discs described above, commercially available pre-recorded CDs bearing the mark shown below can also be played on this unit.
PAGE 5
PREPARATION .................................................................. Supplied Accessories After unpacking, make sure the following items are included in your package. • Remote Control • Batteries (size AA, UM-3, R6) (2) • RCA Pin Cables (2) • Optical Fiber Cable (1) COPY A OPEN/CLOSE FADE IN/OUT REC MUTE REC REC MODE FINALIZE DISPLAY A/B TIME B TRACK NO.
PAGE 6
.................................................................. PREPARATION GETTING STARTED Remote Control ■ Loading the batteries in the remote control ■ Remote control operation range 1 NATURAL SOUND CD RECORDER CDR–D651 REC MODE TRACK NO.
PAGE 7
PREPARATION .................................................................. Connections Turn off the power of this unit and the other component, and unplug them from the wall outlet before making any connections. • Correctly connect the input and output jacks on this unit to the input and output jacks on the other component. • Arrow marks (→) in the illustration below indicate the direction of the audio signal.
PAGE 8
.................................................................. PREPARATION ■ To prevent a malfunction of this unit • Do not use any non-standard shaped CDs (heart, etc.) available on the market, because it may damage this unit. • Hold discs by touching only the edges or center hole. • When a disc is not currently being used, remove it from the recorder and store in an appropriate case. • With proper disc maintenance, cleaning should not be necessary.
PAGE 9
CONTROLS AND FUNCTIONS ................................................. Front Panel 1 2 NATURAL SOUND CD RECORDER 34 5 6 7 89 0 q w er t CDR–D651 REC MODE TRACK NO. FINALIZE ERASE COPY POWER DISC A INPUT DIGITAL ANALOG y MULTI JOG PUSH MODE DIGITAL REC LEVEL DISPLAY A DISC TEXT/TIME DISPLAY B A DISC PHONES LEVEL MIN ; l k j h B Recordable ReWritable REC MUTE MAX g REC FADE IN/OUT f d s a p o ANALOG REC LEVEL MIN MAX i u 1 POWER ..................................
PAGE 10
...................................................CONTROL AND FUNCTIONS 1 COPY .............................................................. P.16 2 OPEN/CLOSE A, B 3 REC FADE IN/OUT .............................. P.13,15,19 COPY 1 4 REC MUTE ..................................................... P.19 A OPEN/CLOSE 5 REC MODE ................................................ P.16,17 B 2 3 4 5 o REC MODE FINALIZE DISPLAY A/B ERASE INPUT 6 TIME TEXT p a s DIMMER d MENU f EDIT DELETE 8 TEXT ..
PAGE 11
CONTROL AND FUNCTIONS ................................................... Total disc play time Display The display located in the center of this unit provides information about disc A and disc B. Press DISPLAY A or DISPLAY B on the front panel (DISPLAY A/B on the remote) to select the disc information you wish to see.
PAGE 12
...................................................CONTROL AND FUNCTIONS Before starting recording and playback, it is necessary to set the mode for each operation using the MULTI JOG knob on the front panel (MENU and +/– on the remote). 1. While this unit is in the stop mode, press and rotate the MULTI JOG knob (MENU and +/– on the remote) to display the items in the menu.
PAGE 13
RECORDING RECORDING TO A DISC ....................................................... 1 2,4 3 COPY NATURAL SOUND CD RECORDER CDR–D651 REC MODE TRACK NO. FINALIZE ERASE COPY POWER DISC A INPUT DIGITAL ANALOG MULTI JOG PUSH MODE A DIGITAL REC LEVEL DISPLAY A DISC TEXT/TIME DISC PHONES LEVEL MIN OPEN/CLOSE B DISPLAY B A B Recordable ReWritable REC MUTE MAX FADE IN/OUT REC MUTE REC REC FADE IN/OUT 2,4 TRACK NO.
PAGE 14
........................................................RECORDING TO A DISC 10,11 NATURAL SOUND CD RECORDER 9 CDR–D651 2 REC MODE TRACK NO. FINALIZE ERASE COPY POWER DISC A INPUT DIGITAL ANALOG COPY MULTI JOG PUSH MODE A DIGITAL REC LEVEL DISPLAY A DISC TEXT/TIME DISC LEVEL MIN B Recordable ReWritable REC MUTE MAX REC FADE IN/OUT ANALOG REC LEVEL MIN MAX REC MODE FINALIZE ERASE DISPLAY A/B INPUT TIME 1 ■ To start recording 1. Press REC.
PAGE 15
RECORDING TO A DISC ....................................................... Selecting an Input Source Press INPUT to select the appropriate input source to be used for recording among optical digital recording, analog recording, and copying from disc tray A. • To record a digital source, press INPUT to light DIGITAL. • To record an analog source, press INPUT to light ANALOG. • To record a source CD placed on the disc tray A, press INPUT to light DISC A.
PAGE 16
....................................................... RECORDING TO A DISC GETTING STARTED DIGITAL REC LEVEL knob Setting the Recording Level DISPLAY A/B MULTI JOG REC MODE TRACK NO. FINALIZE ERASE INPUT MULTI JOG PUSH MODE INPUT DIGITAL ANALOG DISC A COPY TIME TEXT DIMMER DELETE SET DIGITAL REC LEVEL REC MODE TRACK NO.
PAGE 17
RECORDING FUNCTIONS ..................................................... CD DIRECT Copy Synchronized Recording This unit has a CD DIRECT copy function using both disc trays. It digitally copies an entire source CD placed on disc tray A onto a disc placed on disc tray B to be used for copying. This function automatically starts recording when an audio signal is detected. Therefore, recording starts at the same time the source CD starts playback.
PAGE 18
......................................................RECORDING FUNCTIONS This mode is convenient for recording all of the material from a single audio source such as an MD, cassette tape, or LP. Track markers are automatically placed between the tracks being recorded. 1-5. Repeat the steps described in the previous section “Single track synchronized recording”. 6. Press REC MODE twice. ALL and SYNCHRO indicators light in the display.
PAGE 19
RECORDING FUNCTIONS ..................................................... Track and Disc Erase (CD-RW discs only) CD-RW discs can be erased and new recordings can be made after material has been erased. The following 4 types of erasing are possible with this unit. ■ TOC Erase TOC erase is only available on a CD-RW disc that has been finalized. After the TOC is erased, the effects of finalization are defeated, and further recording is possible. 1. Load a CD-RW disc that has been finalized. 2. Press ERASE.
PAGE 20
......................................................RECORDING FUNCTIONS 1. While this unit is in the record or stop mode, REC MODE TRACK NO. FINALIZE ERASE COPY DISC A INPUT DIGITAL ANALOG press and rotate the MULTI JOG knob (MENU and +/– on the remote) to select “FadeIn time” or “FadeOutTime” in the set menu. MULTI JOG PUSH MODE DIGITAL REC LEVEL DISC B 2.
PAGE 21
RECORDING FUNCTIONS ..................................................... ■ CD TEXT editing Making a name using the remote control This unit can edit CD TEXT data on the disc to be used for recording. Each name can contain up to 23 characters using capital and lower case letters of the alphabet, numbers, and symbols. CD TEXT data editing should be complete before finalization is performed. Once the disc is finalized, CD TEXT data editing is not possible. 1.
PAGE 22
.................................................................. FINALIZATION 1. Load a recorded (but not finalized) CD-R or CDRW disc. • Before loading the disc, make sure there are no scratches, dust, fingerprints or similar marks on the disc. If necessary, clean the disc as described on page 7. 2. Press FINALIZE. Finalize? L dB –60 R 2 REC MODE TRACK NO.
PAGE 23
PLAYBACK PLAYING 1 OR 2 CDS .......................................................... 1,8 2,3,7 NATURAL SOUND CD RECORDER CDR–D651 REC MODE TRACK NO.
PAGE 24
.......................................................... PLAYING 1 OR 2 CDS CD RECORDER CDR–D651 REC MODE TRACK NO.
PAGE 25
PLAYBACK FUNCTIONS ....................................................... ■ To program Program Play 1. Press PROG on the remote to begin You can enjoy listening to your favorite tracks in any desired order by programming tracks. This unit can program a total of as many as 40 tracks on disc tray A and B using the remote control. programming while this unit is in the stop mode. 2. Press A or B located at the lowest part of the remote to select a disc to be programmed.
PAGE 26
....................................................... PLAYBACK FUNCTIONS 1. Press PROG during programming to display the track number of the first track. Random Play You can play all tracks in the disc in a random sequence. 2. Each time t or y is pressed, the programmed REPEAT RANDOM CLEAR RANDOM track numbers and their order in the program can be checked. ■ To correct program data A B A 1. Press t or y during programming to select the B RECORDING track number to be corrected.
PAGE 27
PLAYBACK FUNCTIONS ....................................................... Single Repeat Repeat Relay You can listen to a desired single track or the track being played repeatedly. You can repeatedly listen to all of the tracks on both CDs placed on disc tray A and B alternately. 1. Press REPEAT on the remote. REP S indicator 1. Set the “Play Mode” in the set menu to RELAY. appears in the display. REPEAT RANDOM Play RELAY CD CLEAR REPEAT L dB –60 R –30 –I0 –6 –4 –2 –I 0 OVER 2.
PAGE 28
....................................................... PLAYBACK FUNCTIONS Auto Play Connect the headphones to the PHONES jack and adjust the volume by using LEVEL. This unit can start playback automatically when the power of this unit is turned on using an external timer by selecting “Auto Play” in the menu settings.
PAGE 29
ADDITIONAL INFORMATION ADDITIONAL INFORMATION ................................................... CD-Recorder System Notes and Limitations ■ About track length and number • The CD specifications state that the minimum length of a CD track must be 4 seconds. If a recording is stopped while the track is less than 4 seconds long, the unit will record silence until the 4 second track length requirement has been reached, and then stop recording. • CDs can be recorded with up to 99 tracks on them.
PAGE 30
.................................................. ADDITIONAL INFORMATION Can’t Copy Digital recording cannot be performed. (See “SCMS copy protection” on page 28.) Check Disc Close The disc tray is being closed. Data Track This is displayed when the data track is played back. Disc Full Recording is not possible because there is no blank space remaining on the disc. Erases all tracks on a CD-RW disc. If you want to erase all tracks, press w/d (w on the remote).
PAGE 31
ADDITIONAL INFORMATION ................................................... Troubleshooting If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. When talking to the service center, the CDRD651 may be needed.
PAGE 32
.................................................. ADDITIONAL INFORMATION ■ Audio Performance ■ General Frequency response ........................... 5–20,000 Hz, ±0.5 dB Power supply [U.S.A. and Canada models] .................. AC 120 V, 60 Hz [Australia model] ..................................... AC 240 V, 50 Hz [U.K. and Europe models] ...................... AC 230 V, 50 Hz [General model] ........... AC 110/120/220/240 V, 50/60 Hz S/N ratio Playback ...............................................
PAGE 33
UCA CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT ATTENTION L’emploi de commandes, de réglages ou un choix de procédures différents des spécifications de cette brochure peut entraîner une exposition à d’éventuelles radiations pouvant être dangereses.