User Guide

30
C2 STOP Stop C + Q
Cm2 CONTINUE Continue C + W
D2 START Start C + E
Dm2 TEMPO Tempo C + R → [Value] → L
E2 BANK SELECT Bank Select *1 C + T → [MSB] → [LSB] → L
F2 PROGRAM CHANGE Program Change *2 C + Y → [Value] → L
Fm2 GM ON GM Mode On C + U → L
G2 SOUND OFF All Sound Off C + I
(each channel)
Gm2 XG ON XG System On
C + O → L
A2 MERGE ON/OFF Merge On/Off *3 *4 C + P
(all channels)
Am2 MIDI CH MIDI Channel *5
C + { → [Value] → L
B2 FIXED VELOCITY Fixed Velocity C + } → [Value] → L
C3 RPN Wheel Assign (RPN) *6 C + A → [MSB] → [LSB] → L
Cm3 CONTROLLER Wheel Assign C + S → [Value] → L
(controller number) *6
D3 NRPN Wheel Assign (NRPN) *6
C + D → [MSB] → [LSB] → L
Dm3 DRUM NUMBER Drum Number Before executing the operation below, use the keyboard to select the
desired drum sound (see page 27 ).
C + F → L
E3 TRANSPOSE Q Transpose Down *7 C + G → • • • •
F3 TRANSPOSE W Transpose Up *7 C + H → • • • •
Key Panel Name Function Operation Steps Operation Examples
(see page 26)
Group A Functions — List
Press and hold C while performing the operation
steps for the desired Group A function.
For detailed explanations on the basic operations, refer to
pages 25 – 27. The numbered footnotes that follow these
charts provide additional details on certain operations.
● Footnotes
*1 When entering Bank numbers, the internal tone genera-
tor ignores invalid Bank numbers (even if the Bank on a
connected tone generator has changed).
*2 The actual program change number transmitted by the
CBX-K1XG is the displayed number minus 1. For
example, program number 001 on the display is actually
transmitted as 000.
When entering program numbers, the internal tone
generator ignores invalid program numbers (even if the
program on a connected tone generator has changed).
When stepping up or down through program numbers,
“empty” programs or Voices in a Bank are skipped, and
the next available program is automatically selected.
Program numbers can also be selected without pressing
PROGRAM CHANGE (by entering only the value and
pressing ENTER).
*3 When a MIDI buffer full error message results, MIDI
Merge is automatically set to OFF.