Owner's Manual
Table Of Contents
- INTRODUCTION
- IMPORTANT MANUAL INFORMATION
- IMPORTANT NOTICE
- TABLE OF CONTENTS
- SAFETY INFORMATION
- LOCATION OF THE WARNING AND SPECIFICATION LABELS
- DESCRIPTION
- INSTRUMENT AND CONTROL FUNCTIONS
- PRE-OPERATION CHECKS
- OPERATION
- RIDING YOUR ATV
- PERIODIC MAINTENANCE AND MINOR REPAIR
- CLEANING AND STORAGE
- SPECIFICATIONS
- CONSUMER INFORMATION
8-48
1
2
3
4
5
6
7
8
9
10
11
CAUTION:
ECB00680
Make sure the bulb holder cover is securely fit-
ted over the bulb holder and seated against the
reflector.
7. Place the headlight unit in the original posi-
tion, and then install the screw.
8. Adjust the headlight beam if necessary.
EBU25550
Adjusting a headlight beam
CAUTION:
ECB00690
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the adjusting
screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).
EBU25610
Replacing the tail/brake light bulb
If the tail/brake light bulb burns out, replace it as
1. Headlight bulb holder cover
2. Headlight bulb holder
3. Headlight unit
1
2
3
1. Headlight beam adjusting screw
1
(a) (b)