Owner`s manual

Changes in UTILITY MODE

Chapter 2 Upgrade Reference

UTILITY - SEQUENCE - Play&Rec [Playing and Recording] ☞ 297

If you attempt to record to a non-empty sequence, the A3000 will now ask for confirma-

tion before overwriting the original sequence data.

UTILITY - SYSTEM - KEYS ☞ 300

• You can now jump to this page from almost any location by pressing COMMAND +

ASSIGNABLE.

• The ASSIGNABLE key now supports two additional operations, as selected by the

ASSIGNABLE parameter at Knobs 2 and 3. The new Knob & FKEY on/off setting sets

the ASSIGNABLE key so that it simultaneously enables or disables knob controller

action and function-key play. The new MIDI → Smp on/off sets the ASSIGNABLE key

so that it toggles the MIDI-to-sample feature on and off.

• Knob 5 (Knob1Type) is now used to select the turn action for Knob 1. This setting

applies to the turn action on all A3000 pages. On Version 1, Knob 1 rotation can only

be used to switch from page to page. On Version 2, rotation can be used either to

switch the page or to switch the sample selection.

To select page-switch action, set Knob1Type to page. To select sample-select action,

set Knob1Type to sample. Note that if you set Knob 1 to operate as a sample selector,

you must use the function keys to change the pages.

• On Version 1, Knob 5 set the AUDITION parameter. This parameter has now been

moved to the new Audition page, described below. The parameter is now named

TrigMode.