Owner's Manual

276
Chapter 7 DISK Mode
IMPORT Function
IMPORT - ImpOthr (Import Other Data Type)
Imports SMF, AIFF, or WAV file into an A3000 sequence.
PROGRAM
TRIM / LOOP
RECORD
PROGRAM
TOTAL EQ
PLAY
EDIT
REC
DISK
UTILITY
SAMPLE
MAP / OUT
SETUP
SAMPLE
PANEL PLAY
EASY EDIT
FILTER
METER
SEQUENCE
SEQUENCE
EFFECT
EG
EFFECT
VOLUME
MASTER
SETUP
LFO
EXT CTRL
DISK
SYSTEM
CONTROL
MIDI / CTRL
MONITOR
IMPORT
MIDI
Turn Knob 1 to select ImpOthr.
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn action ✔✔✔ --
Push action ✔ ---✔
Use this page to import a TX16W sample, a computer-generated AIFF or WAV sample
file, or a standard MIDI file (SMF) purchased in a store or generated by a sequencer or
computer.
Important
• The A3000 recognizes the file type by its file extension. The A3000 will not be able to
handle the file if the extension is incorrect.
File extensions are as follows.
.W xx TX16W sample file (xx: arbitrary)
.AIF AIFF sample file
.WAV WAV-type sample file
• To import a file generated at a computer, begin by saving the file from the computer
onto an MS-DOS–format floppy disk. You can then insert the disk into the A3000.
Use either of the following MS-DOS format types.
If 2DD disk: 7-sector format (720 KB)
If 2HD disk: 18-sector format (1.44MB)
• The A3000 supports SMF File Type 0.
FYI
Changes in pitch, loop playback, or sound quality may occur with some samples. Note
also that the A3000 may be unable to recognize certain AIFF and WAV files.