User Manual

CVP-601 Owner’s Manual
92
10
Connections – Using Your Instrument with Other Devices –
Formatting a USB Flash Memory
When a USB flash memory is connected, a message may appear prompting you to
format. If so, execute the format operation.
1 Insert a USB flash memory for formatting into the [USB TO
DEVICE].
2 Call up the operation display.
[FUNCTION] → [J] UTILITY → TAB [L][R] MEDIA
3 Press the [A]/[B] buttons to select the USB flash memory to be
formatted from the device list.
The indications USB 1 and USB 2 will be displayed depending on the number of
the connected devices.
4 Press the [H] (FORMAT) button to execute the Format operation.
NOTICE
The format operation deletes
any previously existing data.
Make sure that the USB flash
memory you are formatting
does not contain important
data. Proceed with caution,
especially when connecting
multiple USB flash memory
devices.
Confirming the remaining memory
You can check the remaining memory of the connected USB flash memory by pressing
the [F] (PROPERTY) button in step 4 above.
2
4
3