Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
4-10
4
EAU14185
Seats
Passenger seat
To remove the passenger seat
Remove the nut and washer, and then
pull the passenger seat up.
To install the passenger seat
1. Insert the projection on the front of
the passenger seat into the seat
holder as shown and place the
seat in the original position.
2. Install the washer and nut, and
then tighten the nut to the specified
torque.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the seat holder by remov-
ing its bolts, and then pull the rider
seat up.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, and then place the seat
in the original position.
1. Nut
2. Washer
Tightening torque:
Passenger seat nut:
13 Nm (1.3 m·kgf, 9.4 ft·lbf)
1. Seat holder
2. Projection
1. Bolt
2. Seat holder
1. Seat holder
2. Projection
U1BF12E0.book Page 10 Tuesday, May 1, 2012 3:18 PM