Owner's Manual
Table Of Contents
- INTRODUCTION
- IMPORTANT MANUAL INFORMATION
- TABLE OF CONTENTS
- LOCATION OF IMPORTANT LABELS
- SAFETY INFORMATION
- DESCRIPTION
- INSTRUMENT AND CONTROL FUNCTIONS
- Main switch/steering lock
- Indicator and warning lights
- Speedometer unit
- Self-diagnosis device
- Handlebar switches
- Clutch lever
- Shift pedal
- Brake lever
- Brake pedal
- Fuel tank cap
- Fuel
- Catalytic converters
- Fuel cock
- Starter (choke) knob
- Seats
- Helmet holder
- Storage compartment
- Adjusting the shock absorber assembly
- Luggage strap holders
- Sidestand
- Ignition circuit cut-off system
- FOR YOUR SAFETY – PRE-OPERATION CHECKS
- OPERATION AND IMPORTANT RIDING POINTS
- PERIODIC MAINTENANCE AND ADJUSTMENT
- Owner’s tool kit
- Periodic maintenance chart for the emission control system
- General maintenance and lubrication chart
- Removing and installing panels
- Checking the spark plugs
- Canister (for California only)
- Engine oil and oil filter element
- Final gear oil
- Cleaning the air filter element
- Carburetors
- Checking the engine idling speed
- Checking the throttle cable free play
- Valve clearance
- Tires
- Spoke wheels
- Adjusting the clutch lever free play
- Adjusting the brake lever free play
- Adjusting the brake pedal position and free play
- Brake light switches
- Checking the front brake pads and rear brake shoes
- Checking the brake fluid level
- Changing the brake fluid
- Checking and lubricating the cables
- Checking and lubricating the throttle grip and cable
- Checking and lubricating the brake and shift pedals
- Checking and lubricating the brake and clutch levers
- Checking and lubricating the sidestand
- Lubricating the swingarm pivots
- Checking the front fork
- Checking the steering
- Checking the wheel bearings
- Battery
- Replacing the fuses
- Replacing the headlight bulb
- Replacing a turn signal light bulb or the tail/brake light bulb
- Supporting the motorcycle
- Front wheel
- Rear wheel
- Troubleshooting
- Troubleshooting chart
- MOTORCYCLE CARE AND STORAGE
- SPECIFICATIONS
- CONSUMER INFORMATION
SPECIFICATIONS
9-1
9
Dimensions:
Overall length:
2340 mm (92.1 in)
Overall width:
880 mm (34.6 in)
Overall height:
1075 mm (42.3 in)
Seat height:
695 mm (27.4 in)
Wheelbase:
1610 mm (63.4 in)
Ground clearance:
140 mm (5.51 in)
Minimum turning radius:
3100 mm (122.0 in)
Weight:
With oil and fuel:
XVS65A 233 kg (514 lb)
XVS65AC 235 kg (518 lb)
Engine:
Engine type:
Air cooled 4-stroke, SOHC
Cylinder arrangement:
V-type 2-cylinder
Displacement:
649 cm³
Bore × stroke:
81.0 × 63.0 mm (3.19 × 2.48 in)
Compression ratio:
9.00 :1
Starting system:
Electric starter
Lubrication system:
Wet sump
Engine oil:
Recommended brand:
YAMALUBE
Type:
SAE 10W-30, 10W-40, 10W-50, 15W-40,
20W-40 or 20W-50
Recommended engine oil grade:
API service SG type or higher, JASO
standard MA
Engine oil quantity:
Without oil filter element replacement:
2.60 L (2.75 US qt, 2.29 Imp.qt)
With oil filter element replacement:
2.80 L (2.96 US qt, 2.46 Imp.qt)
Final gear oil:
Type:
SAE 80 API GL-4 Hypoid gear oil
Quantity:
0.19 L (0.20 US qt, 0.17 Imp.qt)
Air filter:
Air filter element:
Dry element
Fuel:
Recommended fuel:
Unleaded gasoline only
Fuel tank capacity:
16.0 L (4.23 US gal, 3.52 Imp.gal)
Fuel reserve amount:
3.0 L (0.79 US gal, 0.66 Imp.gal)
Carburetor:
Type × quantity:
BDS28 x 2
Spark plug(s):
Manufacturer/model:
NGK/DPR7EA-9
Manufacturer/model:
DENSO/X22EPR-U9
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Clutch:
Clutch type:
Wet, multiple-disc
Transmission:
Primary reduction system:
Spur gear
Primary reduction ratio:
68/38 (1.789)
Secondary reduction system:
Shaft drive
Secondary reduction ratio:
19/18 × 32/11 (3.071)
Transmission type:
Constant mesh 5-speed
Operation:
Left foot operation
–20 –10 0
10
20 30 40 50 ˚C
10 30 50 70 90 1100 130 ˚F
SAE 10W-30
SAE 15W-40
SAE 20W-40
SAE 20W-50
SAE 10W-40
SAE 10W-50
U1BF11E0.book Page 1 Tuesday, April 13, 2010 9:28 AM