Owner's Manual

AUDIO SYSTEM AND CB RADIO
5-4
5
CB Radio
● Programming preset radio stations
Long push (two seconds or more)
● Selecting the preset radio station
programming mode
CB radio button “CB”
This button is used to perform the fol-
lowing operations.
Short push (less than one second)
● Turning on the CB radio
● Selecting the squelch level mode
Long push (one second or more)
● Turning off the CB radio
EAU15480
Making basic settings
Turning on/off the audio system
To turn the power on
1. Make sure that the key is in the
“ACC” or “ON” position.
2. Push the “AUDIO” button once for
less than one second.
To turn the power off
Push the “AUDIO” button once for one
second or more.
Adjusting the audio system volume
Turn the volume control knob until the
desired audio system volume is dis-
played (e.g., “Vo:10”). The audio sys-
tem volume can be set between “0” and
“30”. After the adjustment is made, the
audio system returns to normal opera-
tion and the current audio mode ap-
pears in the display.
IC (Intercom volume)
RB: on/oF (Roger beep)
SP/HS
(Output)
U1BM10E0.book Page 4 Tuesday, June 29, 2010 1:31 PM