Owner's Manual
Table Of Contents
- INTRODUCTION
- IMPORTANT MANUAL INFORMATION
- TABLE OF CONTENTS
- LOCATION OF IMPORTANT LABELS
- SAFETY INFORMATION
- DESCRIPTION
- INSTRUMENT AND CONTROL FUNCTIONS
- Main switch/steering lock
- Indicator and warning lights
- Multi-function meter unit
- Handlebar switches
- Clutch lever
- Shift pedal
- Brake lever
- Brake pedal
- Fuel tank cap
- Fuel
- Fuel tank breather/overflow hose
- Catalytic converter
- Rider seat
- Helmet holder
- Sidebags
- Adjusting the shock absorber assembly
- Sidestand
- Ignition circuit cut-off system
- FOR YOUR SAFETY – PRE-OPERATION CHECKS
- OPERATION AND IMPORTANT RIDING POINTS
- PERIODIC MAINTENANCE AND ADJUSTMENT
- Owner’s tool kit
- Periodic maintenance chart for the emission control system
- General maintenance and lubrication chart
- Removing and installing the panel
- Checking the spark plugs
- Canister (for California only)
- Engine oil and oil filter cartridge
- Coolant
- Replacing the air filter element
- Checking the throttle cable free play
- Valve clearance
- Tires
- Cast wheels
- Adjusting the clutch lever free play
- Checking the brake lever free play
- Brake light switches
- Checking the front and rear brake pads
- Checking the brake fluid level
- Changing the brake fluid
- Drive belt slack
- Checking and lubricating the cables
- Checking and lubricating the throttle grip and cable
- Checking and lubricating the brake and shift pedals
- Checking and lubricating the brake and clutch levers
- Checking and lubricating the sidestand
- Lubricating the swingarm pivots
- Lubricating the rear suspension
- Checking the front fork
- Checking the steering
- Checking the wheel bearings
- Battery
- Replacing the fuses
- Replacing the headlight bulb
- Replacing the tail/brake light bulb
- Replacing a front turn signal light bulb
- Replacing a rear turn signal light bulb
- Replacing the license plate light bulb
- Supporting the motorcycle
- Troubleshooting
- Troubleshooting charts
- MOTORCYCLE CARE AND STORAGE
- SPECIFICATIONS
- CONSUMER INFORMATION
PERIODIC MAINTENANCE AND ADJUSTMENT
7-6
7
9 *
Swingarm pivot
bearings
• Check bearing assemblies for
looseness.
• Moderately repack with lithium-
soap-based grease.
√ Repack.
10 * Drive belt
• Check belt tension.
• Adjust if necessary.
√ Every 2500 mi (4000 km)
11 * Steering bearings
• Check bearing assemblies for
looseness.
• Moderately repack with lithium-
soap-based grease.
√√√√Repack. √
12 * Chassis fasteners
• Check all chassis fitting and fas-
teners.
• Correct if necessary.
√√√√√
13
Brake lever pivot
shaft
• Apply silicone grease lightly. √√√√√
14
Brake pedal pivot
shaft
• Apply lithium-soap-based grease
lightly.
√√√√√
15
Clutch lever pivot
shaft
• Apply lithium-soap-based grease
lightly.
√√√√√
16
Shift pedal pivot
shaft
• Apply lithium-soap-based grease
lightly.
√√√√√
17 Sidestand pivot
• Check operation.
• Apply lithium-soap-based grease
lightly.
√√√√√
18 * Sidestand switch
• Check operation and replace if
necessary.
√√√√√√
No. ITEM ROUTINE
INITIAL ODOMETER READINGS
600 mi
(1000 km)
or
1 month
4000 mi
(7000 km)
or
6 months
8000 mi
(13000 km)
or
12 months
12000 mi
(19000 km)
or
18 months
16000 mi
(25000 km)
or
24 months
20000 mi
(31000 km)
or
30 months
U5S613E0.book Page 6 Wednesday, October 28, 2009 2:48 PM