Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
4-13
4
EAU14321
Helmet holder
The helmet holder is located under the
rider seat.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
4-12.)
2. Attach the helmet to the helmet
holder, and then securely install
the seat. WARNING! Never ride
with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an acci-
dent.
[EWA10161]
To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.
EAU14581
Windshield
[XV17ATY(C)/XV17ATSY(C)]
To suit the rider’s preference, the wind-
shield angle can be adjusted and the
height can be changed to one of two
positions.
To adjust the windshield angle
1. Loosen the bolts on each side of
the windshield.
2. Move the windshield to the desired
angle.
3. Tighten the bolts to the specified
torque.
1. Helmet holder
1
1. Windshield
2. Bolt
U5VN15E0.book Page 13 Wednesday, July 9, 2008 9:23 AM