Owner's Manual
PERIODIC MAINTENANCE AND MINOR REPAIR
6-30
6
3. Connect the headlight coupler.
Installing the headlight unit
1. Install the headlight unit by install-
ing the screws.
2. Connect the coupler to the head-
light body cover.
3. Install the headlight body cover by
installing the bolts.
4. Install the windshield.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU24180
Tail/brake light
This model is equipped with an LED
type of tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
EAU38380
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw, and then
turning the lens counterclockwise.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by turning it clock-
wise, and then installing the screw.
CAUTION:
ECA11190
Do not overtighten the screw, other-
wise the lens may break.
1. Screw
U2C512E0.book Page 30 Tuesday, July 10, 2007 5:18 PM