Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3-13
3
EAU35791
Passenger backrest
To remove the backrest
1. Push the lever on each side of the
backrest downward.
2. Push the backrest forward until it
stops, then lift it upward and re-
move it by pulling it to the rear as
shown.
To install the backrest
Place the backrest in the original posi-
tion, then pull it backward until it stops
and the levers snap locking it into
place.
WARNING
EWA12561
A loose backrest could cause an ac-
cident.
After installing the backrest, check
that both levers are fully locked into
place.
1. Backrest lever
1. Locked position
U1D611E0.book Page 13 Thursday, April 28, 2005 1:18 PM